PDA

View Full Version : Theoben mfr porn



nutshot
18-05-2011, 08:35 PM
Pure post just to show off now my mfr is totaly finished :D

My mate and a member on here Ash. offered to make me a new stock for my MFR . Always wanted a black and grey laminate stock so Ash ordered a lump from the US for me and nocked me up this beauty :cool:

8" barrel , carbon shroud , 200cc bottle and Ashley Jackaman stock :cool:

http://i150.photobucket.com/albums/s112/nutshot-uk/ashstock6.jpg
http://i150.photobucket.com/albums/s112/nutshot-uk/ashstock3.jpg
http://i150.photobucket.com/albums/s112/nutshot-uk/ashstock4.jpg
http://i150.photobucket.com/albums/s112/nutshot-uk/ashstock3.jpg

pablo19
18-05-2011, 08:39 PM
She's a beaut! :D if that was in a magazine the pages would defo be stuck together lol ;)

deanw5262
18-05-2011, 08:41 PM
OOOOOOhhh thats nice:)

greenman
18-05-2011, 08:52 PM
Nurse!.....nurse!...ive had a little accident :o

angrybear
18-05-2011, 08:57 PM
Hi,
Not at all my style,
but its a work of art.

markyboy
18-05-2011, 09:06 PM
Nice, very very nice.

Mark

Ash.
18-05-2011, 09:08 PM
Nice, very very nice.

Mark

Cheers Mark.:)

Buster321c
18-05-2011, 09:09 PM
I want that one

mk3 lover
18-05-2011, 09:17 PM
i whant somthing special like that for my daystate yummy :D:D:D

dbc-65
19-05-2011, 04:33 PM
Very nice Nick, Ash's stock has complemented your work there mate.:eek::cool:,a

The Robin
19-05-2011, 06:07 PM
WOW that is class, love it :D

Minuteman
19-05-2011, 06:20 PM
Kudos to you.

:)

Murphy
19-05-2011, 06:59 PM
Do we not have black and grey laminate in the UK ?! :eek: :D

nutshot
19-05-2011, 07:24 PM
Do we not have black and grey laminate in the UK ?! :eek: :D

Not that I can find . This laminate was from boyds in america and pre cut in a rifle blank size lump for a very reasonable cost untill the tax man stuck his extra bit on :(

nutshot
19-05-2011, 07:26 PM
Cheers for all the nice comments :) I realy am chuffed to bits with it and if it wasn`t for Ash would not be the gun it is so big thanks to Ash for taking the time to do it for me :)

xpfisherman
19-05-2011, 07:29 PM
The Bipods not up to much mate :D:D:D:D:D

Kidding it looks the mutz nutz

nutshot
19-05-2011, 07:34 PM
The Bipods not up to much mate :D:D:D:D:D

Kidding it looks the mutz nutz

But it is made from titanium :cool: :D and some masking tape :cool:

xpfisherman
19-05-2011, 07:42 PM
But it is made from titanium :cool: :D and some masking tape :cool:

In that case I hope you have it under patent LOL

Very nice gun though


ATB


Mark

nutshot
19-05-2011, 07:54 PM
In that case I hope you have it under patent LOL

Very nice gun though


ATB


Mark

Cheers Mark ;)

If you want a bipod as cool as mine pm me and I`ll send you some grade 5 Ti bar and tape to make your own foc :D Got a bucket full of thin stuff and no use for it .

oneseven
19-05-2011, 09:01 PM
Now that looks awesome and I bet it handles like brilliantly!

I have a spare .22 barrel for my rapid and this is making me want to cut it to 8" and have a shroud made. If Theoben would make a rifle like this they would fly out of the factory!

Ash.
19-05-2011, 09:04 PM
No Worries Nick. Yours always welcome fella:). Thanks again for the Nutshot mod for my HW, finishes it off a treat:cool: oh and the other ones ive had off you in the past.

Ash.
19-05-2011, 09:05 PM
Now that looks awesome and I bet it handles like brilliantly!

I have a spare .22 barrel for my rapid and this is making me want to cut it to 8" and have a shroud made. If Theoben would make a rifle like this they would fly out of the factory!

Me to. Very tempted my self.:)

nutshot
19-05-2011, 09:16 PM
Now that looks awesome and I bet it handles like brilliantly!

I have a spare .22 barrel for my rapid and this is making me want to cut it to 8" and have a shroud made. If Theoben would make a rifle like this they would fly out of the factory!

Go for it :) its no stress getting 12ftlb with 8" . I did a shot count on a 280cc bottle with 220 bar fill and got 192 shots (189 on reg and last few to finish the mag less than 10 fps slower) and accuracy is unchanged . If you can make your own shroud Ive got plenty of carbon tube at the mo so could spare you enough to make a shroud ;)

Spoke to Theobens engineer at Newark and told him the same do a micro carbine , I also told him how to make there quick fill regs better so if they change it so the bottle can come off you know why :D

nutshot
19-05-2011, 09:22 PM
No Worries Nick. Yours always welcome fella:). Thanks again for the Nutshot mod for my HW, finishes it off a treat:cool: oh and the other ones ive had off you in the past.

No prob Ash ;) Its nice that we can share our skills ;)

thumbhole
19-05-2011, 10:00 PM
Nutty, it does it for me. Very nice matey :cool:

westbrom1
19-05-2011, 10:25 PM
work of art that is nick

lionel
20-05-2011, 07:57 AM
Gorgeous! Theoben should really take note and bring out a stumpy Rapid.

oneseven
20-05-2011, 11:20 AM
Go for it :) its no stress getting 12ftlb with 8" . I did a shot count on a 280cc bottle with 220 bar fill and got 192 shots (189 on reg and last few to finish the mag less than 10 fps slower) and accuracy is unchanged . If you can make your own shroud Ive got plenty of carbon tube at the mo so could spare you enough to make a shroud ;)

Spoke to Theobens engineer at Newark and told him the same do a micro carbine , I also told him how to make there quick fill regs better so if they change it so the bottle can come off you know why :D

Very interested, I'll send you a PM!

DannyT
20-05-2011, 11:43 AM
Very very nice Nick, I love all things carbined!!

I have a Fenman and can't get on with the stock so want to get a thumbhole one, do you know if they ever did one??

Cheers.

Atb.

Danny.

nutshot
20-05-2011, 03:33 PM
Very very nice Nick, I love all things carbined!!

I have a Fenman and can't get on with the stock so want to get a thumbhole one, do you know if they ever did one??

Cheers.

Atb.

Danny.

Hi Danny ,
I`m not that clued up on the theoben boinger range :D Don`t think I have ever sean a thumbhole factory stock for a fenman but would have thought if they do one for another gas ram model it has a high chance of fitting . Best bet is to give custom stocks a ring as I doubt it would be much trouble for them to do a cs700 or 800 as they have the inlet pattern for the action ;)

Nick

DannyT
20-05-2011, 03:51 PM
Hi Nick,

I phoned staff synthetic stocks up and am waiting to hear back from them, are custom stocks a different crowd?

Cheers

Danny.

nutshot
20-05-2011, 04:04 PM
Custom stocks are the people who make all the stocks for theoben ;) Fortunalty they are 5 mins from where I live :D heres there contact details ;) http://www.customstock.co.uk/Contact.htm

pukey
20-05-2011, 04:27 PM
Love it!

I want too customise mine now .....and I haven't got one yet!

Luke

Ash.
20-05-2011, 08:19 PM
thanks 4 all your comments on
my stock lads. planning on building some more in the near future.:-)

greenman
20-05-2011, 09:25 PM
Hi Danny ,
I`m not that clued up on the theoben boinger range :D Don`t think I have ever sean a thumbhole factory stock for a fenman but would have thought if they do one for another gas ram model it has a high chance of fitting . Best bet is to give custom stocks a ring as I doubt it would be much trouble for them to do a cs700 or 800 as they have the inlet pattern for the action ;)

Nick

the fenman profile..i remember dribbling over it yonks ago,too far from my monetery reach..twas in hyedua too..beautiful timber.Her and bo derick...never mind!

nutshot
20-05-2011, 09:42 PM
the fenman profile..i remember dribbling over it yonks ago,too far from my monetery reach..twas in hyedua too..beautiful timber.Her and bo derick...never mind!

That wasn`t a thumb hole ;) got 2 hyedua profiles on my mk1 rapids

DannyT
22-05-2011, 10:32 AM
Hi Nick,

Thanks for the link mate.

Atb.

Danny.

Steve K
22-05-2011, 11:46 AM
Custom stocks are not normaly my thing especially some of the bulky looking HFT type ones, but i really like that, it looks superb!;)