View Full Version : Question about AA S400/410 with anti tamper
04-03-2012, 01:41 PM
Is it still possible/ relatively easy to switch them from right hand to left hand bolt?
04-03-2012, 03:14 PM
As far as I know, two of the bolts holding the breach to the action are A/T.
You need to remove the breech to alter the handing pin.
04-03-2012, 10:09 PM
That seems so daft when the new superlighg stock is an ambi?
14-03-2012, 11:15 PM
Very easy on my new S410 Hunter, a real pain on the TDR had to use dremel to cut a flat on pin then get a new one.
Even checked with AA to make sure I was doing it ok on the TDR
Powered by vBulletin® Version 4.1.7 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.