PDA

View Full Version : Help With Night Vision Scope

s16-smit
16-01-2007, 07:33 PM
Just bought me and my son a night vision scope , its fine going on the logun s-16 and the brocock enigma but the FX verminators magazine sticks up and i cant get the night vision scope on , IS there something i can get to put it on with :confused: and if so where from . thanks in advance graham/michael
s16-smit
16-01-2007, 10:44 PM
Anyone help
cliveward
16-01-2007, 11:36 PM
Hi Guys,

Let me know what night scope you have and I'll see if I have something to do the job.


Cheers





Clive
s16-smit
16-01-2007, 11:43 PM
Hi , its the night vision scope d143 and theres no problem putting it on the other guns but because the magazine sticks up on the verminator i was thinking is there some kind of adaptor cheers graham/michael
Baldie
17-01-2007, 01:12 AM
Just bought me and my son a night vision scope , its fine going on the logun s-16 and the brocock enigma but the FX verminators magazine sticks up and i cant get the night vision scope on , IS there something i can get to put it on with :confused: and if so where from . thanks in advance graham/michael


AB3 RAISING RAIL / ARRESTOR BLOCK - The dovetailed AB3 can be used as a scope raising rail (2 required)

See >> here (http://www.sportsmatch-uk.com/products.html)<< Look for image about 9/10 down the page. IIRC cost about £10. ;)
cliveward
17-01-2007, 10:45 AM
Graham,

We do a set of high 11mm to weaver adapters. They are 12mm high overall and increase the mounting height by 8mm (measured from top of rifle dovetail to centre of weaver base.

Will this give you enough clearance to clear the magazine?


Cheers





Clive
s16-smit
17-01-2007, 03:53 PM
Cheers guys thats just what i need , I knew there must be something but i looked in my collection of airgun magazines and couldnt find anything thanks again graham/michael:D
s16-smit
18-01-2007, 05:56 PM
Graham,

We do a set of high 11mm to weaver adapters. They are 12mm high overall and increase the mounting height by 8mm (measured from top of rifle dovetail to centre of weaver base.

Will this give you enough clearance to clear the magazine?


Cheers





Clive
Yes clive i think that would do it . cheers graham/michael