PDA

View Full Version : Cheap RCBS chargemaster combo anyone?

foxshooter
29-04-2008, 12:53 PM
Saw this on that site the other day and thought it a bargain for someone

Item number 110246985583

Mark
coldweld
29-04-2008, 01:22 PM
I'm bidding on it ! Thanks for telling everyone else !
EMcC
29-04-2008, 07:54 PM
Careful,
There's a few of them about with dodgy software. Programme in a number and the next number higher comes on the readout.
The problem with mine was all down the left side of the pad No's 1,4,7,0 and the decimal point. I was lucky and got it replaced under guarrantee but have heard I am not the only one to have the problem.
Baldie
30-04-2008, 08:14 AM
Jeez, over £300 new? :eek:

I got a bargain then. Bought mine off a fella here, too embaressed to mention the price. :o Bloomin' wundaful tool.

I'm paranoid about making sure the powder weight is correct, so I bought a 5-0-5 beam scale to check every 5th load. Chargemaster is spot on. :cool:
foxshooter
30-04-2008, 12:36 PM
Jeez, over £300 new? :eek:

I'm paranoid about making sure the powder weight is correct, so I bought a 5-0-5 beam scale to check every 5th load. :cool:


Why doesnt that surprise me ;):rolleyes::D


You coming to minsterley then ????

Mark
Baldie
30-04-2008, 06:40 PM
Why doesnt that surprise me ;):rolleyes::D


You coming to minsterley then ????

Mark


Can't afford it. :o


Was hoping Pierre was going and coming back on the same day [Saturday], but he thinks he's staying overnight. If I drive myself, it's still a £60-£80 day, with fuel, food and Range fees.

Shame, as I was gonna show everyone a [I]working 260 Montana. :p
Tommo
30-04-2008, 09:07 PM
Can't afford it. :o


.....If I drive myself, it's still a £60-£80 day, with fuel, food and Range fees.

Shame, as I was gonna show everyone a working 260 Montana. :p

Reduced range fees...:D;)
Baldie
30-04-2008, 09:26 PM
Reduced range fees...:D;)

Can you do me some reduced diesel fees too? :D :D
foxshooter
01-05-2008, 01:36 PM
I'm bidding on it ! Thanks for telling everyone else !


You got it in the end then :)

A good saving on one purchased here in the UK too

Mark
coldweld
01-05-2008, 06:47 PM
Yes ! not much interest in it , the cheapest i had been quoted was £ 280 + p&p.

Well pleased.