Yup, get an older style AA quick fill (male & female) attach both to hoses which attach to both bottles, job done. (Make sure the non-return valve has been knocked out of the QF adapter).
I have a 300bar 10litre bottle and a 232 3litre bottle it is possible to buy an adapter to go on the end of a charging hose/guage to top up the 232 bottle from the 300??? It would be nice to just take the small bottle to the club instead of the whopping great 10 litre jobbie
Cheers
Yup, get an older style AA quick fill (male & female) attach both to hoses which attach to both bottles, job done. (Make sure the non-return valve has been knocked out of the QF adapter).
Try not to get 300 in the 232 cylinder, they can get a bit fatwa if your not carefull.
Cheers Davestate , Problem is i only have one charging hose
Is it possible to get a fitting to screw on the end of the hose that connects straight to the DIN fitting on the 232 bottle??
I was wondering how long it would takeTry not to get 300 in the 232 cylinder
Cheers mate, Ill try not to
Vince
(being cheeky.Not taking the **** )
Yup, simply fit a male AA quick fill to a 232Bar DIN fitting and the female QF to the hose.
Knockedover,
Speak to Clubshot on here. He will sort you out with all the correct bits. He did the same for me a number of months back. I have the same rig as you do. Easy peasy, when you know how. Davestate has pictures of all the adapters if I'm not mistaken.
Cheers
Paul.
Cheers Pavel, Ill give Clubshot a try
I get ya now DohYup, simply fit a male AA quick fill to a 232Bar DIN fitting and the female QF to the hose
Cheers Mate
Easy way, when you have a universal female off your bottlesOriginally Posted by Knockedover
is a microbore pipe, with two Males without valves
Opening smaller bottle first.
I have pipes and Males with No Valves
All Stock items
BOB/R