Results 1 to 10 of 10

Thread: Co2 Cylinder Valves - Paint Ball Experts?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2005
    Location
    nottm
    Posts
    780
    ive just picked up 2 9oz co2 paintball bottles £25 delivered brand new uk supplier fast delivery or one for £14.99 !
    AA S410 .177k Ben taylored HW100KT .177 HW100KT .20. FX Wildcat .22

  2. #2
    Join Date
    Oct 2001
    Location
    St Helens, Merseyside
    Posts
    7,343
    So I would need to get this sorted for under a Tenner, failure may compel me to start brewing again.

    Regards Ora

  3. #3
    Dead_eye Guest
    Ora8i- Il see if i can get you a spre bottle next time im marshalling mate, the co2 used in drinks machines is well under the pressure used in pb guns and air rifles and the bottles have a much lower test limit and tolerances etc.

    And even if it wsa i wouldnt go messing around with the valve unless youve done it before, co2 is a different animal to air and although it has less pressure its freezes everything solid and brittle. Ive only ever seen to MAJOR valve faliures on co2 bottles, one was on a bulk fill bottle (5 ft high beast) that took out a brick wall and embedded its self 12ft in a mud bank not to mention the serious freeze burns and shock it gave all of us around it! The other ivolved a customer breaking the bottle bracket while he was on top of an 8ft barricade, the bottle fell smashed the valve of with the loudest bang ive ever heard and proceeded to smash through everything in its path for go knows how far- we never found it!!

    Do you need anything else while im there like o-rings for the bottles??

  4. #4
    Join Date
    Oct 2001
    Location
    St Helens, Merseyside
    Posts
    7,343
    Dead-eye.

    Mmmm..

    Brewing's looking better and better, I was going to buy a 3.5oz bottle of SteveD but I cancelled intending to put the QB on the back burner for a few months. However as I got a bottle I though I would see if I could use it; any thing for bulking a QB would need to be 3.5, 6 or 7 oz or they are just too big to use easily.



    Many Thanks Ora

  5. #5
    Join Date
    Oct 2001
    Location
    St Helens, Merseyside
    Posts
    7,343
    So can the valve be changed?
    Would Paint ball shops then fill it?

    Regards Ora

  6. #6
    AdrianAdrian Guest

    Do PCP instead?

    In my previous thread C02 to PCP you and Greyhair (sp?) said its very easy to convert co2 to PCP using a regulated supply paintball gun kit to take the pressure down to around 850-900psi .

    You can buy reg'd air bottles from £50 and lines for about £30 that could be used on several guns.

    Also: Links: www.cooper-t.com,

Similar Threads

  1. PCP's Valves
    By SCW22 in forum General Airgun.
    Replies: 3
    Last Post: 06-05-2005, 05:36 AM
  2. self regulating valves
    By engineer in forum General Airgun.
    Replies: 2
    Last Post: 09-08-2004, 05:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •