I prefer the suitably sized cleaning rod down the muzzle type approach myself after taking all the safety precautions mentioned.
ATB
Ian
I prefer the suitably sized cleaning rod down the muzzle type approach myself after taking all the safety precautions mentioned.
ATB
Ian
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
and let you know what has happened or not happened...
Regards,
Tony
I checked for stuck pellets, barrel is clear, in hindsight the magazine was empty when I attached the air cylinder...
I then removed the valve assembly, unscrewed the Anti Bounce Tube(Part #45) to check if the C-Clip was still attached near the valve stem, and it was, reassembled the valve assembly to make sure that the Anti-bounce ball(Part #46) was in the detent, put everything back together, attached the buddy bottle, cocked the gun and squeezed the trigger, nothing...
Anymore ideas?!?! Airguns of Arizona thinks the regulator is bad...
Regards,
Tony
Hi - You could try removing the regulator and shaking it. If it rattles, the piston's stuck and it will need servicing. This happened to mine, but it still fired - so may not account for your problem. Good luck.
SJ
hopefully it doesn't get hung up in customs, etc...Originally Posted by essjay
Regards,
Tony