A Clamp is Made for 207 & 232 BarOriginally Posted by ChrisW6
Not Suitable for 300 Bar
Din Gauges are suitable for 300 Bar
MDE Air Gun Gauges are more compact and only need testing every Five years
Against every 2- 3 years for other types , A & Din
Check out Precharge Section on
www.midlanddiving.com
Basically They was made for Diving
300 Bar are more for Air Gunners
20 & 232 are Cheaper as thinner walled than 300 Bar
But 300 Bar holds a lot more Air Under preasure
Not forgetting that most filling stations charge
the same regardless of bottle or Bar load.
BOB/R