you dont im afraid
left in a divers bottle. ??
you dont im afraid
Remind me never to take up diving then.Originally Posted by Rabbit Man
I have a gauge I can screw into the DIN fitting. Open the valve eh voila! Got it off here from a chap called Les for £20.
I put a blanking plug in the end of my hose and just read the pressure off.
Seems to work O.K.
ATB
Ray.
very good idea
Where do you get these from Ray. ?Originally Posted by Raygun
You could try Clubshot on here
Just a St St 1/8 BSP plug. Fits the screw fitting on the end of your hose.
ATB
Ray.
I started a similar thread last year.Originally Posted by Andyman
Someone made mea a blanking plug that screwed into a male AA plug. Ijust put it in the female on the hose and open the valve fully to read the pressure on the bottle.
Make sure that the male has the ball valve removed or it will hold full pressure!!!
I can't remember who made it for me! But if you search my name for threads you will find the info.
I am using a Blackberry to do this so I can't search myself at the moment
Cheers
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
Clubshot sorted me a blanking plug out, the cost was approx £3 posted I think.
Once Bob sees this he will let you know.
Richard
"Improvise, adapt and overcome."
I can count to potato.
I will double thatOriginally Posted by Raygun
Zeb
You can get them from Pirtek as I did. As Raygun says, it's just a standard 1/8" BSP blanking plug. Email me if you haven't got a local Pirtek or Bob doesn't leap in as I may have a spare.Originally Posted by Andyman
Jonathan
forget the Doughty washer to seal the plug!Originally Posted by Snapshot
BTW it was Clubshot who did mine
Cheers
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
Following last years interest
I did get a supply of 1/8 & 1/4 Locking Nut's
Which I have been supplying UK Posted @ £3.00
Which included a Bonded Washer
Or £8.00 if attached to a Male with No Valve
But a Male with a Valve will do the same
BOB/R
bob@practicalshooting.org.uk