Hi Paul,

Thanks much for your reply. Non-hold sensitive R1 at 10.5 ft/lbs M.E.? Very interesting. And with the factory weight (heavy) piston at that! Imagine!

I had a custom, lightweight piston made for my .177 FWB124 springer (factory piston: 10.5 oz & custom 124 piston: 8.5 oz), and put in a soft tune kit that had 7.9 gr JSB Exact Express 4.52 doing 770 fps (7.9 gr CPLites did 730 fps with same tune due to tighter fit). Hold sensitivity was reduced, but still had about 1" vertical difference between where the groups hit at 40 yds, sitting w/rest vs. standint w/rest.

Do you remember how the R1/hw80 was at 12 ft/lbs ME? I'm not sure I have anything to drop my R1 down to 10.5 ft/lbs, but I do have an old Jim Maccari 13 ft/lb kit I might be able to use to get down to an even 12 or 11 via no spacing.

Again, thanks for your comments.

Robert Hamilton