Results 1 to 15 of 169

Thread: Spring Gun Tuning

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Paul Hudson Guest
    Quote Originally Posted by rehmk5 View Post
    Teeth jarring at 12 ft/lbs? Well at about 17 ft/lbs, my R1 has a fast bit of kick.
    I found the HW80 to be a bit of an enigma

    At 17 to 18fpe they're sweet and smooth; at 12fpe they're "tolerable" but unpleasant. At 10.5fpe they become sweet and smooth again, and a genuine pleasure to use. With the lighter, 7.9g pellets, I was getting the same muzzle velocity as with 8.4g pellets at the higher power, so the trajectory and POI was exactly the same.

    Have fun with your tinkering

    Paul.

  2. #2
    Join Date
    Sep 2007
    Location
    monterey, california, USA
    Posts
    11

    hw80 power levels

    Well, thanks for sharing your HW80 experiences Paul.
    Much appreciated.
    Few in the USA have experience with the lower power levels.
    Robert Hamilton, Calif, USA
    (now back to reading the news about our idiot politicians)

  3. #3
    Paul Hudson Guest
    Quote Originally Posted by rehmk5 View Post
    (now back to reading the news about our idiot politicians)
    Nothing different on your side of the pond then either...

    Let us know how you get on with the 80.

    All the best,

    Paul.

  4. #4
    Join Date
    Dec 2005
    Location
    Grantham Lincs
    Posts
    2,774
    Just squeezed mine up to 23fpe and it's fantastic, a real self contained FAC air gun with enough power to be worthwhile. Over 900 fps with light pellets and 800fps with 16g.
    Stuff on the box.

  5. #5
    Join Date
    Feb 2004
    Location
    Radcliffe on Trent ,nottinghamshire
    Posts
    4,663
    e-sheep
    whats the accuracy / recoil like at that level .

  6. #6
    Join Date
    Jan 2007
    Location
    Melksham Wilts
    Posts
    154

    Tx200hc

    Hello Everyone


    Could you please give me some advice. I have bought a second hand TX200HC and decided to fit an AA master service Kit.
    I followed the tuning guide found it very easy to strip fit and reassemble the TX. But now it is only doing 7.5 ft lb.

    Thanks Tom.

  7. #7
    Join Date
    Dec 2005
    Location
    Grantham Lincs
    Posts
    2,774
    Accuracy is superb and shoots as well as my 77, recoil is solid and mild straight back. More recoil than the 77 but not much and it's not hold sensitive.
    Stuff on the box.

  8. #8
    Join Date
    Jan 2007
    Location
    Melksham Wilts
    Posts
    154
    Quote Originally Posted by martinj View Post
    you will have more luck with a reply if you start your own thread rather than hijacking someone elses
    Sorry If I have upset anyone but I thought this was the Spring Gun Tuning Guide Thread.

    Tom.

Similar Threads

  1. Spring gun tuning
    By two screws in forum General Airgun.
    Replies: 6
    Last Post: 07-02-2009, 01:20 PM
  2. Spring compressors for a, er, spring change
    By pgakister in forum General Airgun.
    Replies: 18
    Last Post: 28-01-2009, 09:49 PM
  3. Shortening a Spring Gun's Spring ...
    By Gungeek in forum General Airgun.
    Replies: 7
    Last Post: 27-06-2006, 11:57 AM
  4. Spring has Spring care of Robin!!
    By ora8i in forum General Airgun.
    Replies: 0
    Last Post: 12-06-2006, 06:37 PM
  5. tuning a gun to a pellet (no tuning tips here)
    By hip shooter in forum General Airgun.
    Replies: 4
    Last Post: 12-12-2004, 02:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •