Spring Gun Tuning

[kash2001]

How do you untune a tuned air rifle ? I know it sounds an odd question but without cutting the spring or ordering a weaker spring, is there a way of de tuning the action.

As once the internals are polished and oil correctly i can't see any way of lowering the power.

If theres no other answer than the above then fine, just interested if theres some thoughts on how it could be done differently.

Cheers
Paul

[99CLOMP]

if the gun has any washers between the rear guide and spring you can remove one or two, if not it may have a front spring guide this can be shortend or removed, or replaced with shorter lighter one, always have a look in side the piston between the front guide and piston front as some tuners will put a washer right at the front,there are lots of ways to reduce power on a tuned gun with out removing the TUNE

[Hsing-ee]

How do you untune a tuned air rifle ? I know it sounds an odd question but without cutting the spring or ordering a weaker spring, is there a way of de tuning the action.

As once the internals are polished and oil correctly i can't see any way of lowering the power.

If theres no other answer than the above then fine, just interested if theres some thoughts on how it could be done differently.

Cheers
Paul

You can increase the dead space in front of the piston by drilling a hole in the piston face but it's a bit radical. Getting a different spring is the easier and more reversible option. You are talking about adjusting the power of the rifle rather than detuning it really, which is what you will need to do everytime the spring needs replacing anyways.

[kash2001]

Thanks for the info guys not being a machinist the easiest route appears to be a weaker spring, or removing the wieghts if there are any a big help many thanks for that at least there are a few options

Thanks
Paul

[LukeB]

Quick question re: IPA. There is some varnish on the blueing on the outside of the chamber on my FWB Sport where a previous owner has re-varnished the stock with the action still in place. Will the IPA remove the varnish do you think? I am guessing that the IPA won't react with the blueing in anyway and damage it???