Registered User
I use a lot of GT85 - on the various motor/pushbikes/garden tools. Prefer it to WD40, in fact. Fine for gears/chains, show no signs of rust/seizing, kept outside all year round. The garden tools get a heavy coat over winter. But have only ever used it to soak a seized piston on my guns. Think it's too thin/not durable for gun use.
ATB
Bru
Webley Mk3 x2, Falcon & Junior rifles, HW35x2, AirSporter x2, Gold Star, Meteors x2, Diana 25. SMK B19, Webley Senior, Premier, Hurricane x 2, Tempest, Dan Wesson 8", Crosman 3576, Legends PO8.
Owns three Roy orbison albums
Here's a great test of various lubes and their rust protection results.
https://www.bennetts.co.uk/bikesocia...nter-inhibitor
Registered User
Some interesting tips and advice here, thanks very much !
Registered User
What’s everyone using these days instead of the dri slide? I’ve seen “Phillips Molybdenum gun lubricant” for sale , has anybody had any luck with that or any other suggestions ?
Or should I just apply the moly grease as thi as possible to the inside of the chamber?
Registered User
Any advice on TP sizes as I wanted to experiment with various lengths and calibre barrels
Chris
bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars
Killer Vampire Lesbians on scooters
Depends on the gun. The 25mm piston 77’s seemed to benefit from opening to 3.9mm, modern LGU/LGV were similar. How much air are you shifting and what is the current volume of the TP?Originally Posted by 32:1
My ignore list: <Hidden information>
Registered User
A simple spring gun they say
My Cometa 300 compact.22 has a TP of 4.00mm x 12mm
The .177 fusion has a TP 3.25 x 12
The 220 compact.22 TP 3.00 x12
All share bore size but strokes a little shorter on the 300-220
I want to fit a full length .25 barrel to the 220 and hopefully find a TP that allows a barrel change without any internal changes
I now see Cometa change their TP’s to suit what cal/barrel is being fitted
My 300 and 220 share the same bore, stroke and calibre.
The pistons are different and the 300 makes 10.8 and the 220 10.2, the 220 feels nicer to shoot and has become my go to gun, but at the range at 30yds both make the same 20p holes with 10 shots, the 300 definitely has a snap to it and feels lively compared, and I never thought it would be as accurate.
Ive now added a 7mm SS nose with a hwBritseal and dropped the power to 10 and it feels nicer in the shoulder. I can feel how much quicker the 300 is but another range visit to see if accuracy has changed is needed
bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars
Posting Permissions
Reply With Quote