Surely Keiran should buy a Falcon Merlin 4-14x42 Mildot.....ey Rob
Could I have any opinions on this scope please, both good and bad. I'm looking to upgrade on my legend, it is a great scope but as i've mentioned countless times before the mil dots are too far apart to be useful as aim points. Will this scope be an improvement on the legend? Is there any quirky problems with this scope such as a 'wandering zero' is it temperature sensative?
Surely Keiran should buy a Falcon Merlin 4-14x42 Mildot.....ey Rob
I wouldn't say it was that much optically better than the Legend.
I'd wait till mid June when the 4200 S/F is released.
any more opinions please, good or bad!
Originally Posted by xxrobrsvxx
i have some arriving this week at £200 each if you want one
I have a 4.5-14x40 on my wifes FN12 , stunning little scope. the side PA is a nice touch and re-parallax is easy to do.
Very clear and havent had a problem with zero shift.
Even better as i paid £150 for mine
If it's got tits or wheels it’s going to be expensive.....
Steve can you add a little info about the re- parallax ? Just mounted the scope but its set for 50 yards min.
I took the objective lens off and can see something to twist - is it as simple as that ? Gonna have to make some kinda tool to do it though.
Thanks
Chris
Originally Posted by phcjpp
take the front peice off the scope(it just screws off) then turn the lens outwards about 1 full turn should do, you will then be able to see extremely clearly at airgun ranges now!
Hi
unscrew the front lens bell (the bit with the writing) and you will see the objective lens with a notch cut out either side. just put something like a ruler in both of these notches and turn the lens out a turn or two.
Start will 1 full turn (outward)and see how you get on, you may need a few more or less fractions of a turn .
Just make sure you keep the objective lens still when you screw the cap on again
if you have any probs just PM or e-mail me.
Regards
Steve
If it's got tits or wheels it’s going to be expensive.....
do what steve said!
You beat me to itOriginally Posted by kieranhw100
I know when im not wanted
If it's got tits or wheels it’s going to be expensive.....
Outwards - is that clockwise or anti-clockwise assuming the notches are facing me ?
Ta
Chris
So more of the treads are exposed.Originally Posted by phcjpp
As soon as you take the ring off you will see exactly what im talking about.
All the best
Steve
If it's got tits or wheels it’s going to be expensive.....
I guess if I am seeing more threads I must be screwing it into the housing (to reveal more thread) but outwards with respect to the scope. Hope thats correct. Will try tonight and make sure I put something over the lens to avoid scratching it!
Chris
Aay up Kieran whats up with the old one ? do's it keep falling off
only joking m8t first dibs on th legend
Glynn