Walther G22, the good, the bad.

[Pop Larkin]

I think you can buy a pod which fits to the weaver rail

[marconi59]

G22 & Harris Bipod:
you can fit a weaver mount one or:
you can open up the forend and fit a QD (may affect your warranty.)

Side mount walther parts are available for QD's on the sides to carry a sling.

I mounted a rear QD as well and use my usual sling and bipod.

The trigger rod can be straightened slightly, or a guide block fitted, or a stronger rod fitted. In all cases check your trigger is still safe!

My zero kept wandering but 2 things fixed it.
a) Fit the metal shim from Walther in the forward scope riser.
b) don't store it in the gun cabinet in the plastic travel case.

To make it better, I'd like a metal interior to the scope rail risers, solidly connected to the action.

Otherwise I love it.
Have it set for left handed eject.
Caution, do not fire it with the opposite hand to what it's set for.
It almost took my mates front teeth out and he was holding back to compensate!!!

Mines likes Winchester subs.

2 jams in 800 rounds,,,still running in.

[Pop Larkin]

.....Side mount walther parts are available for QD's on the sides to carry a sling.

Where did you get the side swivel mounts from?

[marconi59]

t'was on the rimfire forum..search walther g22.
They look like long thread equipped QD's and go into the side holes provided.

[Carlitobrigante]

Russell,

I dont suppose that you have a part number for this part to mod the scope rail upright? is it an official walther mod?
Could you post some pics of the part?

Thanks,

Carlito.

[marconi59]

It's about the size of your thumbnail, made of chequered steel and trapezoid in form, with a slot.

You slacken the forward rail screw, slip it in and tighten it up.

Seems a few were missed in assembly. Mine included.

It's free issue from the importer

try an email to:
info@carl-walther.de

Include your serial number.
Ask for a catologue as well.

[Carlitobrigante]

Thanks Marconi59,

Will do!

Cheers,

CB.