Results 1 to 14 of 14

Thread: s410 cylinder change..

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2005
    Location
    Fakenham
    Posts
    4,894
    While you are in there and going to all this trouble, might be worth replacing the valve too. They only cost about £4 and apparently, the new one is supposed to be more efficient, giving a few more shots per fill.
    (\__/)
    (='.'=)
    (")_(")
    AA S410, one gun, and I know how to use it.

  2. #2
    Join Date
    Dec 2003
    Location
    SHEFFIELD,UK
    Posts
    2,624
    hi all,

    went to the range and shot 70 shots,until the gun was starting to string downwards with every shot,
    the guns valve seemed to be stuck on 50 bar ,
    back home,and i fired air through the gun about 8 times before a very feeble "wizz" of air came out,
    right,out with the mole grips and the scrap of leather belt i always use and within 10 mins .. it was all done
    the end filler part was slightly "harder" to unscrew,although it was quite easy to remove,
    i re-screwed the end filler valve part way back in while i used the grips to unscrew the cylinder,

    both cylinders and gun

    inner valve tube thing

    i had thoaght with the longer tube on that the tdr silencer wouldn't fit,id already got a "ukneil" adapter on standby
    but it still fits (which made my day )

    clearance of cylinder and silencer

    i grabbed the hills pump and filled her up to 180 bar and several hours later its still all in ,
    and it still all fits in the t.d.r bag/box
    i can feel its now slightly more front heavy,
    i think im going to like this gun better now
    il be back out on friday givin it a go,and poss a run through my cb625,

    cheers guys,

    JASON..
    lots of takedowns

  3. #3
    Join Date
    Sep 2004
    Location
    Liskeard, Cornwall
    Posts
    14,313
    Glad it all went OK.

    Gus
    The ox is slow, but the earth is patient.

  4. #4
    Barrie_G is offline It could be worse...............................
    Join Date
    Feb 2003
    Location
    Ashington, Northumberland, UK
    Posts
    2,364
    Glad you're sorted, they really are simple guns to work on once you over come the fear of high pressure compressed air

  5. #5
    SNAKEBITE is offline Somebody must love me.......
    Join Date
    Jun 2005
    Location
    BURGESS HILL WEST SUSSEX
    Posts
    864
    Is it possible to check and clean the inside of the cylinder once it is off?
    I use a Pump rather than a bottle and was wondering if it was time to check for corrosion or grease from the pump.
    I AM NOT RACIST, I HAVE A COLOURED TELLY

  6. #6
    Join Date
    Sep 2004
    Location
    Liskeard, Cornwall
    Posts
    14,313
    Its quite easy to take the front filler block off, and have a look. if its started to rust, replace the cylinder. (And get a bottle..!

    Gus
    The ox is slow, but the earth is patient.

  7. #7
    Join Date
    Dec 2003
    Location
    SHEFFIELD,UK
    Posts
    2,624
    i had a good look inside both,and there was no rust or anything on the surfaces,
    but removing the filler valve is a realy simple thing to do,

    im thinking about getting another bottle as im always cream crackered with the hills pump


    JASON..
    lots of takedowns

Similar Threads

  1. S410 cylinder removal and refitting
    By bitmonkey in forum General Airgun.
    Replies: 12
    Last Post: 09-11-2005, 10:53 PM
  2. Cylinder Size of AA S410 .177 classic
    By RetroHunter in forum General Airgun.
    Replies: 1
    Last Post: 16-03-2005, 09:55 PM
  3. s400 barrel and cylinder change?
    By maty j in forum General Airgun.
    Replies: 10
    Last Post: 15-03-2005, 09:37 PM
  4. help! s410, empty air cylinder - can't refill
    By Cam in forum General Airgun.
    Replies: 10
    Last Post: 14-10-2004, 09:43 AM
  5. Air arms s410 cylinder.
    By p.j. in forum General Airgun.
    Replies: 15
    Last Post: 23-11-2003, 01:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •