I have a Stealth bottle adapter it looks like:-
<pre class="ip-ubbcode-code-pre">

***********|
|
Stealth Bottle **** ¼ BSP Male
Screws in Here |**** Connection to air source
|
***********

</pre>

At the bottom of the ¼ Male BSP thread there is an “O” ring to form a seal.

I would need to reduce from a ¼ BSP male to a 1/8 BSP male. I have tried the commons steel fittings from a plumber’s merchant but the final 1/8BSP male thread has no internal socket (chamfer) and so would damage the hose fitting.

What fitting is required to connect this adapter to a standard hose?

Also what fitting would be needed to connect directly the valve/gauge assembly DIN fitting out let it were the hose normally screws in.

What should I expect to pay for these fittings?


Regards Ora