335
Hi.
I have changed the spring in a 335 before, I used a crude home made spring
compressor. once the stock is removed you can see the long flat safety plate
running around the trigger block. I just break the barrel open and it moves it off the trigger, then remove the tiny sprung end plate, that leaves it open ended. That will allow the trigger to come straight out once you remove the
pins(using a spring compressor)
As far as I can remember that is, have not done one for a while.
http://www.chambersgunmakers.co.uk/Anschutz.htm
Mike.
Michael Bridgewood
For Sale: Webley Service Series 3, Pre War BSA.
Wanted: Webley Service MK11 Series 1 & 2