viper 10x44

[Gary C]

Setting up tips.

1. Ignore the numbers on the parallax dial. Whoever put them on has obviously had too much rice wine or my eyes are shot to pieces

2. I find about 40 yards on the dial works for me

3. This allows me to rangefind 40 and 45 by the haze on the view.

MAKE SURE YOUR EYE IS ALWAYS IN THE MIDDLE OR IT WILL WHITE OUT AND YOU WILL GET PARALLAX ERROR

4. Check 17 yards - will be clear - this is where you start to need hold under fo rnormal targets

5. 14 to 17 yards hazy to start of blur - aim on unless it's a 15mm kill

6. If it's blurred either aim at the top of the target if its blurreb but long - if it's reet blurred like and dead close give it 1.5 mil dots

The only problem targets are the 13-15 yard 15mm kills. Go practice them, if find squinting helps

[Dunk1302]

Great Tips Gary - thanks!!

Got my Viper zero'ed at the weekend - and mighty pleased with it I am too....

Only problem now is the rifle won't fit in my gunslip OR my flambeau case as the turrets on both sides of the scope make the combo to wide!!

Just seen that JSR have a nice rectangular slip in for 14.95!!

Dunk