Page 5 of 17 FirstFirst ... 3456715 ... LastLast
Results 61 to 75 of 251

Thread: Another pistol competition

  1. #61
    Join Date
    Jan 2006
    Location
    Warrington, UK
    Posts
    800
    Well....
    Put the first pellet in my FAS 604 yesterday (not even zeroed yet), lined up on a 6yd target, straight through the 10 ring. Woo hoo thinks I - I'm going to enjoy this

    Cock it for the second shot, pffht - burst an internal seal somewhere - no compression. Oh poo thinks I, got to work out how to take the flippin' thing apart now and fit a seal kit

    Ah, the joys of old (ish) air pistols....

    Matt
    .

  2. #62
    Join Date
    Oct 2006
    Location
    Scarborough, N Yorks
    Posts
    18,981
    Quote Originally Posted by Roy G View Post
    Question for the learned ones.

    When you are a crap shot what is the recommended method for zeroing a pistol on iron sights? My hands waving all over the place and it doesnt get much better if I use two hands and rest on a soft support.


    .
    For your sight picture, you will probably find it better if you aim "sub six", with the 6 ring showing between the top of the front sight and the black. Trying to set the black on top of the front sight, you will get them both blending together due to refraction.

    Zeroing. With a recoilless pistol, you could set it in a vice and zero it, but then, shooting offhand, would most certainly be shooting off centre, because everyone has a different "hold".

    Assuming you are landing on the card, shoot 10 to 20 shots and try to make out if you have a group pattern (ignore the flyers). Try to bring the group to the centre of the target, a couple of clicks at a time. When reasonably centred, concentrate on reducing group size. As time goes on, re-centre the group. Do NOT aim at shooting tens, they will come automatically. Do NOT chase the bull with the sights after each group. Shoot groups and try to become consistent.

    Check out:
    http://www.targettalk.org/viewforum....days=0&start=0

    There's a lot of in-depth discussion by real experts, but they are quite happy to discuss with any interested shooters of any standard. Much the same as this board. Target Talk is run by Pilkguns, a US shop catering for target shooters up to Olympic level. LOTS of good info on their site, written by champions.
    Walther CP-2 Match, FAS 604 & Tau 7 target pistols, Smith & Wesson 6" & 4" co2 pistol, Crosman 1377,
    Baikal IZH 53 pistol, Gamo CFX Royal,177, Umarex SA-10 CO2 pistol.

  3. #63
    Join Date
    Apr 2007
    Location
    loughborough...ish
    Posts
    897
    Quote Originally Posted by serowman View Post
    Here we go then Graeme. Cards shot at club yesterday with FWB 80.

    44; 33; 32; 22.

    Consistent ?

    John is still recovering from the 44 (best ever by a mile. Infinite number of monkeys etc.)
    44!! Nice one Roger, although I may be demanding a drugs test at the end if this continues! lol

    Welcome aboard Bigwhiterabbit, your name has been added on the website.

    Scores updated.

    Cheers
    Graeme
    PM me for money saving prices on aquarium fish foods.

  4. #64
    Join Date
    May 2004
    Location
    Ashby de la Zouch
    Posts
    2,540

    John and Petes scores

    Hi Graeme
    Roger was on for a heck of a score but got a bit excited with the 44
    Pete and i shot also our first rounds using the FAS 604's

    Pete; 39/37/41/44 =161
    mine; 47/45/43/45 = 180 never to be repeated

    Ken will shoot his Wednesday pm.
    -----------------------------------------------------------------

    Because this thread is lengthy, I have not read every post, so if this next point has been covered already, then just ignore me:

    Question for you and the rest of the guys
    Can a shooter enter more than once but with a different gun for each entry??

    This would enable some of us to get out of the cupboard an old Webley, HW45/70, Scorpian or Walther springer to compete with, as well as using our favourite target pistol in a separate entry.
    This would also allow us at the end of the season to judge just how good or bad some of the recoiling type pistols are against the recoiless match type pistols of today.
    Same rules of course ie. .177 cal and shot 1 handed, standing and unsupported
    I would be quite happy to put up a modest little prize for best recoiling pistol (and exclude my self from the prize), although I would like to take part
    If the answer is yes, then you could put a cap of 2 entries or 3 entries/person

    Thanks John
    hold me back !!

  5. #65
    Join Date
    May 2004
    Location
    Ashby de la Zouch
    Posts
    2,540
    Quote Originally Posted by MattW View Post
    Well....
    Put the first pellet in my FAS 604 yesterday (not even zeroed yet), lined up on a 6yd target, straight through the 10 ring. Woo hoo thinks I - I'm going to enjoy this

    Cock it for the second shot, pffht - burst an internal seal somewhere - no compression. Oh poo thinks I, got to work out how to take the flippin' thing apart now and fit a seal kit

    Ah, the joys of old (ish) air pistols....

    Matt
    Matt
    I bought my Fas very cheap because the seals had gone
    I made the mistake of ordering a set of seals from Surrey Guns. He charged me £39
    When thy arrived, I went to my local plumbers and bought a matching set which i keep as spares(they cost about £3)
    Only 1 of the Fas seals needs to be hard wearing and that is the one on the moving piston that takes all the wear
    As an experiment, I just used an ordinary O ring (from a plumbing shop)for this purpose and it still works 2 years later. So don't rush into spending £39 for a set of O rings
    Screwfix will sell you a box of 500 for £14 in a full range of sizes

    If you want me to e-mail you the parts diagram for the 604 let me know, as some of the O rings are duplicated in the pistol.

    john
    hold me back !!

  6. #66
    Join Date
    Apr 2007
    Location
    loughborough...ish
    Posts
    897
    John
    I asked a few replies ago about any objections or thoughts on entering wityh more than one pistol, since there was no feedback either way I will say "yes" anyone who wants to enter with another pistol that meets the criteria then go ahead, after all this comp is all about making use of guns that you may not be using so much these days.
    And no doubt the offer of a token prize will sweeten the deal, very kind of you.
    regards
    Graeme

    180!! looks like there is a real competition on now for some of the entrants.

    Scores updated.
    Last edited by pollythedog; 11-12-2007 at 07:24 PM.
    PM me for money saving prices on aquarium fish foods.

  7. #67
    Join Date
    May 2004
    Location
    Ashby de la Zouch
    Posts
    2,540

    FAS 604 seals/O-rings

    For anyone with faulty O-rings on their FAS604
    Hopefully there should be some pics attached that will be useful for O-ring replacement

    and

    Thanks for reply Graeme (re. more than 1 pistol)
    john
    Attached Images Attached Images
    hold me back !!

  8. #68
    Join Date
    Jan 2006
    Location
    Warrington, UK
    Posts
    800
    Quote Originally Posted by pennineway.fswo View Post
    For anyone with faulty O-rings on their FAS604
    Hopefully there should be some pics attached that will be useful for O-ring replacement

    and

    Thanks for reply Graeme (re. more than 1 pistol)
    john

    Only just seen your replies John - many thanks.

    I took the pistol apart tonight and the piston head o-ring is completely trashed (comforting that it was so obvious!) - more on this post:
    http://www.airgunbbs.com/forums/show...7&postcount=10

    I'd already ordered a seal kit when I saw your post (had a feeling that the o-rings would be standard parts, but the kit was only £16 from BAR, so not too bad). As you say, I'll sort out some spares from an engineering supplier to keep for the future!

    thanks again

    Matt
    .

  9. #69
    Join Date
    Jan 2003
    Location
    Newhaven, Sussex (someone's got to live here)
    Posts
    2,572
    Interesting. BAR = £16 v's Surrey Guns = £39. Similar story for other items too as I see they advertise the airgunners favourite chrono - the Combro Mk4 at £79. Don't imagine they sell too many of these items

    I know they're a specialist shop, with access to every Gehmann item under the sun, but that's a tad steep in anyone's language.

    Just shows how important it is to shop around.
    Rapid MkII .22, AA400C .177, AA MPR .177, AA Prosport .177, AA TX200, AA FTP900, HW75 .177, HW45 Silver Star .22, and my dear ol' Webley Ranger .177 (circa 1966) Mile Oak - WEB SITE Air Arms HFT Team member

  10. #70
    Join Date
    May 2004
    Location
    Ashby de la Zouch
    Posts
    2,540

    More scores

    Graeme
    These are Pete's and my scores using springers for round 1

    Pete - HW45
    34/32/33/36 =135

    John - Walther LP53
    36/41/40/39 = 156

    Matt/Biggles
    Thanks for info on BAR. Yet another FAS604 came into the club this week and needs new seals. I changed the piston and breech seals which improved matters, but it wont hold the charge for long, so I guess the smaller O-rings on the exhaust v/v also need replacing

    FAS606
    Does anyone out there own a FAS 606
    I have seen articles on this good looking single stroke pneumatic but never seen one in the metal

    John
    hold me back !!

  11. #71
    Join Date
    Jan 2006
    Location
    Warrington, UK
    Posts
    800
    Quote Originally Posted by pennineway.fswo View Post

    Matt/Biggles
    Thanks for info on BAR. Yet another FAS604 came into the club this week and needs new seals. I changed the piston and breech seals which improved matters, but it wont hold the charge for long, so I guess the smaller O-rings on the exhaust v/v also need replacing
    No worries
    As I'm sure you know, but for the benefit of others who may read this, once you've got the gun apart, replacing the valve o-rings isn't a hard job - three o-rings - one requires dissassembly of the valve. However try not to completely remove the tiny roll pin which holds the valve assembly together (leave it located in one side of the valve head). I did knock it out completely and it looks like it's going to be a bu**er to replace

    Quote Originally Posted by pennineway.fswo View Post
    FAS606
    Does anyone out there own a FAS 606
    I have seen articles on this good looking single stroke pneumatic but never seen one in the metal
    I've never seen one, although Mr Clevely of Checkmate Guns (FAS guru by all accounts and very helpful on the phone), did mention that while he thought the 604 a lovely gun, he considered the 606 to be a "disaster" ....

    cheers
    Matt
    Last edited by MattW; 13-12-2007 at 12:09 PM.
    .

  12. #72
    Join Date
    Apr 2007
    Location
    loughborough...ish
    Posts
    897
    score site updated.
    Cheers
    PM me for money saving prices on aquarium fish foods.

  13. #73
    Join Date
    Nov 2007
    Location
    Dumfries
    Posts
    12

    Competition first round

    I'd like to join the competition if I may.

    With as FAS604 (on loan so I hope I manage to hold onto it for the duration)

    It is my first competition, being new to air pistolling, so I'll have to see how I get on.

    43 - 39 - 40 - 47 - total 169.

    I hope to enter some scores with an HW10 and a Baikal in the next couple of days.

    Andrew

  14. #74
    Join Date
    Apr 2007
    Location
    loughborough...ish
    Posts
    897
    Hi Andrew, you are mopre than welcome. You have been added to the list and the scores updated.
    Cheers
    Graeme
    PM me for money saving prices on aquarium fish foods.

  15. #75
    Join Date
    Nov 2007
    Location
    Dumfries
    Posts
    12

    More competition results

    As promised - I am trying with a range of pistols, and my further results are:

    weihrauch hw40

    31 - 37 - 30 - 40 Total = 138

    Baikal izh-46m

    37 - 43 - 42 - 43 Total = 165

    Some work to do here obviously!

    Andrew

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •