cadet major advice

[andy26]

Does anyone out there know how to remove the trigger block from a BSA Cadet major cylinder. Is there a pin to knock out ? or does it just unscrew. Also does anyone still stock spares for this rifle
Regards
Andy

[I. J.]

From what I can remember the back block just unscrews.
John Knibbsmay be able to provide spares.

HTH
Ian

[gedfinn 2]

Hi, If My memory serves me well. ! There is no pin. IE They just Unscrew.
I have about 3-4 , & some Spares,

They are pretty " Hardy " Though, What do you need, ( And say Sight,s ) They are worth as much as the gun, ??

I had some on the " Forum " At £50 No Taker,s Etc,
There in the Loft ! Cheer,s

[andy26]

Your psychic powers are serving you well today
As usual the rearsight blade, screw and spring are missing with a DIY replacement.
It could also possibly benefit from a breech seal and pistonwasher
Thanks for the advice on the trigger block
regards
Andy

[Greylag]

Does anyone out there know how to remove the trigger block from a BSA Cadet major cylinder. Is there a pin to knock out ? or does it just unscrew. Also does anyone still stock spares for this rifle
Regards
Andy

Hello Andy,

This may help
http://www.gunspares.co.uk/showcatimage.asp?id=24289

Chambers do sell spares as well. The above is a diagram of the Cadet and by the looks of it the back trigger block screws off.

Hope this helps
Regards

[andy26]

Thanks for that chaps
Most helpful.
regards
Andy