Results 1 to 3 of 3

Thread: 410 help please

  1. #1
    Join Date
    Aug 2006
    Location
    Maulden, Bedfordshire
    Posts
    626

    410 help please

    Fired my AA 410 this morning, empty but accidentally left the bolt open.

    Now a small brass bush with a drilled identation on opposite sides has been blown out of the barrel side of the breach.

    Do I just push it back into place or do I need to strip the gun down?

    Thanks in advance

    Richard

  2. #2
    Join Date
    Sep 2004
    Location
    Liskeard, Cornwall
    Posts
    14,313
    This is the breech collar with the transfer port in, so it's rather important..!
    They are locktited onto the barrel. You need to take the barrel off, unscrew the 2 allen bolts on top of the action, the barrel should come out. (some newer S400s have a third screw underneath, to get at this, you need to separate the barrel and breech block from the cylinder. There are 6 allen blots holding it on. Don't lose the transfer port O-ring, which is in betwen the two sections.)
    Carefully locktite the collar onto the barrel, making sure the holes line up. Make sure the loctite has dried, then replace the barrel.

    Gus
    The ox is slow, but the earth is patient.

  3. #3
    Join Date
    Aug 2006
    Location
    Maulden, Bedfordshire
    Posts
    626
    Thanks Gus.

    Richard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •