2 stage regs

[engineer]

as i understand it on regulated rifles they are basically two stage,i.e. bringing the cylinder pressure from say 185 bar down to what,that is my question does anyone know the pressure available at the second, stage thanks in advance.

engineer

[Darren H]

This Regulated pressure varies from Gun to Gun, depending on the size of, not only the Valve but the Transfer Port and Reg Chamber capacity. We've been able to acheive 12ft/lbs with as little as 60bar but on others, required as much as 115+bar

[dwb]

My Daystate CR97 always run at 110 to 115 bar and give me 80 shoots out of a full charge200 bar and the mk3 I am using now run that 110 bar and I get 100+ out of a full charge 200 bar
so I would suggest around a 110 bar and then experiment with Spring and Transfer Port
DWBaines

[engineer]

thanks guys much apprieciated

engineer