loaded up some 75grain amax today using rl15 seated out to 2.461"and shot this 3 shot group at 100yrds prone off a bipod http://i74.photobucket.com/albums/i2...Picture776.jpg managed to pull the last shot slightly otherwise sure they would all be touching,just ordered a 8-32 mag scope so i can see the holes as with 14xmag just aiming at a black blob.very happy with it though
here for a good time not a long time
I would be very warry of taking the blade out. It is a 2min job but the trigger unit was designed with in place. At the weekend shooting when I put the bolt down quickley the trigger went off, only the accu trigger blade stopped the rifle going off !!!!!!!!!!!!!!
tried loads of slam fires and drop it on it,s butt [unloaded]and couldn,t get it to fire.being single shot i close the bolt till it,s on target either and the safety is always on before the shot.i know rely on the safety though
here for a good time not a long time
Taking the blade out just makes it a "normal trigger" if it dont go off with a slam on hte butt id say no problem!bit like any adjustment made on any other trigger!
Andy
Just making you aware of what happened to me. The rifle has never done this before, over 1000 rounds through it.
Going back to the shop today so he can send it back to Garlands for a check up. So will probably be without it for weeks