took the accutrigger out of it today and it is perfect now,managed to get it sighted in and 3 shot cloverleaf group with 69grain lapua scenars.no load development just through some rounds together so it,s looking good and had 2 rabbits at 250yrds so a successfull 2 hours out
here for a good time not a long time
loaded up some 75grain amax today using rl15 seated out to 2.461"and shot this 3 shot group at 100yrds prone off a bipod http://i74.photobucket.com/albums/i2...Picture776.jpg managed to pull the last shot slightly otherwise sure they would all be touching,just ordered a 8-32 mag scope so i can see the holes as with 14xmag just aiming at a black blob.very happy with it though
here for a good time not a long time
I would be very warry of taking the blade out. It is a 2min job but the trigger unit was designed with in place. At the weekend shooting when I put the bolt down quickley the trigger went off, only the accu trigger blade stopped the rifle going off !!!!!!!!!!!!!!
tried loads of slam fires and drop it on it,s butt [unloaded]and couldn,t get it to fire.being single shot i close the bolt till it,s on target either and the safety is always on before the shot.i know rely on the safety though
here for a good time not a long time