I want to buy a buy a 3 litre 300 bar bottle for my HW100s, but have been told that I will need a different adaptor to the one supplied with the rifle, is this true? The kit I'm interested in is here http://www.deepblueshooting.co.uk/product.aspx?id=13657
HW95k cal .177, Simmons WTC 1.5-5 x 20. CZ 452 American .22LR, MTC Mamba 3-12 x 44IR.
you will need a reducer,pm sent
i have a HW100s and also a 3ltr bottle and the 1 that came with the gun fits straight on to the bottle...?
The only thing i had to do was take a little brass off the sholder of the supplyed adapter because the din fitting bottles are too deep buy about 5mm.
It Dont matter how you do it as long as the job getts done
The standard 232 bar fitting does not screw all the way into a 300 bar bottle so you have to either machine approximately 2.5mm off the shoulder on the brass adapter or do as many do and use 2 off 8mm washers in the bottom of the hole which will space the adapter out enough to fit on a 300bar bottle. As you will only be charging the gun to 200 bar you should have no problems. Don't charge any higher than 200 bar though.
Last edited by Norfolkngood; 17-02-2008 at 05:24 PM. Reason: wrong dimension
She was only an Admiral's daughter but her naval base was full of discharged seamen.