have a raider and a hills pump...
when i hook it up to charge, i can only charge about 50 bar at a time before air starts to leak out of the rifle/adaptor connection... any advice?
Graham
have a raider and a hills pump...
when i hook it up to charge, i can only charge about 50 bar at a time before air starts to leak out of the rifle/adaptor connection... any advice?
Graham
Graham
The raider uses a probe with 2 o-rings on it, doesn't it? If so, check the condition of the o-rings very closely to make sure there are no cuts in them. A very light smear of silicone grease on them is usually a good idea. No doubt webley can supply replacement o-rings.
hmmm
what a pratt
took the adaptor off the hose, and realised id only screwed it to a vague, possibly finger tight level....
went at it with spanner and leatherman and is now all working fine!
:-D
doh!
cheers
Graham
Graham