Page 1 of 3 123 LastLast
Results 1 to 15 of 37

Thread: HW45 breach seals - bargain.

  1. #1
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385

    HW45 breach seals - bargain.

    i still have some HW45 breach seal O-rings for sale.

    i bought a bulk lot as my local gun shop, chichester armoury, tried to charge me £4 for one of them (without p&p).
    even more reasonble retailers charge £2 - £3 each plus another couple of quid p&P.

    here, i'll give you 6 for just £3, & that includes P&P.

    so if you're lucky enough to have an HW45 then why not get these while they're still available.

    PM me if you need these & let me know if you prefer paypal (no extra charge) or cheque.
    Last edited by 40apple40; 22-07-2008 at 10:07 AM.

  2. #2
    Join Date
    Dec 2007
    Location
    eastbourne
    Posts
    863
    Thanks, arrived today. should keep me going for a while!
    Theoben Rapid Mk2 .20 - Air Arms TX200 HC .177
    FX Verminator .177 - Theoben Evolution .177

  3. #3
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385
    still some left if anyone's interestd.

  4. #4
    Join Date
    Oct 2007
    Location
    Cotswolds nr cheltenham
    Posts
    0
    I am. Bit tired, it's late even for me. pm me tomorrow and I'll take 10. Cheers Chris...

  5. #5
    Join Date
    Aug 2005
    Location
    Leicester
    Posts
    12,379
    did you know the old hw45's and the new ones take different sized breech O-rings?


  6. #6
    Join Date
    Jun 2001
    Location
    Devizes Wilts (when it gets too hot)
    Posts
    6,576
    Just received my set, thanks. Will have to check they're the right size and my HW45 is not new. If they're not I'll take them in to the shop.

    Jonathan

  7. #7
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385
    Quote Originally Posted by ikarma70 View Post
    did you know the old hw45's and the new ones take different sized breech O-rings?

    thanks for the info. i hadn't heard that before. i just spoke to my local shop & they knew nothing about it either.
    my 45 doesn't have the new fibre optic sights or have the white writing on the side & they're the correct ones for that.

    any problems with sizing for your 45 though & you'll get a full refund.

    thanks,

    jc

  8. #8
    Join Date
    Aug 2005
    Location
    Leicester
    Posts
    12,379
    the old hw45 has a smaller thicker seal in comparison to the new 1.
    i know this cos i had both a new 1 and an old 1,i mislaid the seal(but found it afterwards ) from the old 1 and tried the spare seal that came with my new 45 and it was a different size.

  9. #9
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385
    Quote Originally Posted by ikarma70 View Post
    the old hw45 has a smaller thicker seal in comparison to the new 1.
    i know this cos i had both a new 1 and an old 1,i mislaid the seal(but found it afterwards ) from the old 1 and tried the spare seal that came with my new 45 and it was a different size.
    ok, thanks for that. in that case the seals i have may not fit the new 45s.
    however, if in doubt, order anyway because i'll refund in full if you're not 100% satisfied.

    thanks.

  10. #10
    Join Date
    Apr 2007
    Location
    wellington somerset
    Posts
    2,452
    I'll have some please YHPM

    Thanks

    Eric
    Enjoy every step you take, you never know which one will be your last.

  11. #11
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385

    bump

    bump

  12. #12
    Join Date
    Nov 2006
    Location
    AYLESBURG
    Posts
    917
    recieved todayfit my 45 which is a 92 model ok.it seems strange that you say the new seals fit the older 45's as the last seal I bought from Chambers earlier this year fitted no problem and is the same size as the ones from 40apple40 unless they were old stock at Chambers

  13. #13
    Join Date
    May 2006
    Location
    Morley, Leeds
    Posts
    1,954
    Would these fit an HW75? I used to have a 45 and I think the upper frame, barrel etc are identical apart from the latch mechanism.

    Adam
    “We are too much accustomed to attribute to a single cause that which is the product of several, and the majority of our controversies come from that.” - Marcus Aurelius

  14. #14
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385
    Quote Originally Posted by Adam77K View Post
    Would these fit an HW75? I used to have a 45 and I think the upper frame, barrel etc are identical apart from the latch mechanism.

    Adam
    sorry, i dont know. any one else?

  15. #15
    Join Date
    May 2008
    Location
    portsmouth
    Posts
    385
    Quote Originally Posted by targetmark View Post
    recieved todayfit my 45 which is a 92 model ok.it seems strange that you say the new seals fit the older 45's as the last seal I bought from Chambers earlier this year fitted no problem and is the same size as the ones from 40apple40 unless they were old stock at Chambers
    i think it was the new models that were in question.
    i've had no one come back yet to say they've had a problem though.
    i bet you paid a few quid for the one from you got from chambers?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •