Results 1 to 15 of 15

Thread: Colt 1911 (CO2) power upgrade question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2008
    Location
    London
    Posts
    261

    Smile Colt 1911 (CO2) power upgrade question

    Does anyone know how to tune a Colt 1911 (umarex) CO2 pistol to the legal limit of 6ftlb and what are the pitfalls or negatives to doing this and are there any benefits other than increased power. Better longer range accuracy?

    Woul like to know, thinking of buying one to upgrade then bling up. Chrome with Ivory look grips!

  2. #2
    Join Date
    Aug 2005
    Location
    Leicester
    Posts
    12,379
    very unlikely to get near to 6ft.lb. from a multi shot co2 pistol as the magazine area leaks gas too much.

  3. #3
    Join Date
    Apr 2005
    Location
    Leeds
    Posts
    1,710
    Think I read about .20 barrel conversions which ups the power a bit .

    Carl.
    " This , is MY safety "

  4. #4
    Join Date
    May 2008
    Location
    Edinburgh
    Posts
    279
    I doubt you could increase the power on a Co2 Pistol unless you some how managed to change the valving to allow more Co2 out per shot. Good luck with that

  5. #5
    Join Date
    Mar 2008
    Location
    London
    Posts
    261
    Thanks guys, i know it can be done, possibly with the valve. May need a smith?

  6. #6
    Join Date
    Mar 2008
    Location
    London
    Posts
    261
    Come on guys there must be someone who knows how to open up the valve. Can't be much more than that, maybe a stronger hammer spring?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •