Results 1 to 6 of 6

Thread: External silencer for prosport

  1. #1
    Join Date
    May 2000
    Location
    Guernsey
    Posts
    100

    External silencer for prosport

    Does anyone know of a half decent silncer that will fit on the end of a Air Arms Pro-Sport?

    I picked a second hand one up cheap at a car boot sale and unfortunately for such a lovely gun it been a bit neglected. One problem is the internal baffles have been shot away. I've got most of the remenants out but there is too much stuck inside to replace the baffles as they would no longer fit inside the shroud.

    So, I want to put one on the outside. Are there any that would fit?

    Cheers.

  2. #2
    Join Date
    Jul 2002
    Location
    Cape Town, South Africa
    Posts
    706
    a bit difficult due to the OD of the existing shroud.
    Best to try and get everything out and replace the baffles and endcap

  3. #3
    Join Date
    May 2000
    Location
    Guernsey
    Posts
    100
    Thanks for the reply.

    I've tried to get everything out but left inside are a few tubes that supported the baffles. They appear to be araldited inside and I can't think of any way to get them out

    Anyone got any ideas?

  4. #4
    Join Date
    Nov 2001
    Location
    Blackburn, Lancs. (under a bridge)
    Posts
    22,944
    Originally posted by Cyrilll
    Anyone got any ideas? [/B]
    B.A.R. do a full length barrel shroud/silencer in carbon fibre.


    H.T.H.
    Ian
    Founder & ex secretary of Rivington Riflemen.
    www.rivington-riflemen.uk

  5. #5
    Join Date
    Feb 2003
    Location
    Neston, Cheshire
    Posts
    761

    Cyrilll

    Phone Air Arms, see what they say...

    In my experience, they've always been more than helpfull

    Worst case if the baffles are stuck, maybe sending the action to AA see if they can sort it out?

    Either way it's worth a phone call to find out

  6. #6
    Tomahawkss Guest
    Originally posted by Cyrilll
    Thanks for the reply.

    I've tried to get everything out but left inside are a few tubes that supported the baffles. They appear to be araldited inside and I can't think of any way to get them out

    Anyone got any ideas?
    In my experience the baffles are just a friction fit, Chambers do a complete set for little money and they work quite well, a silencer would really spoil the looks of a prosport.
    If you can hook them out with a bent piece of coat-hanger? they are simple enough to replace.

Similar Threads

  1. Can the AA TX200 SR fit an external silencer?
    By Ludford in forum General Airgun.
    Replies: 7
    Last Post: 01-08-2006, 06:09 PM
  2. TX200 External Silencer
    By Bluelungbutter in forum General Airgun.
    Replies: 6
    Last Post: 23-06-2006, 10:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •