Hi ya,
If you do a search for stock finishing or similar you will find shed loads of info start with my name also cos i asked a similar question not so long ago
good luck
aquarius11
Does anyone have any advice on the best way to look after a walnut stock? Are there any treatments etc. that will protect and beautify it?
Many thanks.
Dom
Hi ya,
If you do a search for stock finishing or similar you will find shed loads of info start with my name also cos i asked a similar question not so long ago
good luck
aquarius11
One Shot = One Kill
Cheap 'n cheerful approach:
Visit your nearest decorator's merchants (e.g. branches of Dixons (and I don't mean the telly shop!) here in the Midlands). A few quid spent will give you a lifetime's supply! Alternatively you can buy walnut treatment oil from your local gunshop, but ounce for ounce you will pay ten times as much for what is essentially the same thing. Also get some fine/extra fine steel wool.
Optional step: if your stock is brand spanking new and feels a little rough, take the action out of the stock and smooth with the steel wool. You may also want to pick up any awkward grain with gentle steaming from a kettle before smoothing. Ensure that the stock is left to dry thoroughly (not on a radiator) at least overnight before proceeding...
Get some boiled linseed oil and terebine dryers. Find an old 35mm film canister or similar and 1/2 fill it with boiled linseed oil. Add ~ 1/2 teaspoon terebine dryers to that amount (sorry not exactly scientific measures here!)). Stir well.
Put a couple of drops of the mixture in your hand and rub very thinly and vigourously with your hand into the stock to generate some warmth. Once the whole stock has been thusly treated (remember very sparingly), leave it overnight and repeat. Do this for a week. Ensure that each coat is thoroughly gone off before applying the next. Thereafter, treat in this way every week for a month or two.
It should look pretty darned good after this. There are more elaborate kits that will produce even better results, I'm told (heard good things about kits from Chambers and Napier).
Thanks for that. I'll go have a look!
Dom
So much advice around! Most of it bad! I have found stuff on the internet, in mags and from talking to shops, mostly very contradictary.
Was talking to Air Arms today, they reckon boiled linseed on its own, cut back between layers with wire wool. The Napier kit contains Alcoroot or something, which has a red tint, so it can give you a very dark finish, fine if thats what you want. The Napier video on stock care is good.
On the subject, I find no matter how careful I am, the stain on AA stocks seems to come off very easily when Wire wooling.