-
Hw45
HI
Just rebuilt and tested my HW45
It's doing 4.14 ft/lbs in .22 with old Eley Wasps.
I have used minimal grease and the dieseling has stopped.
Is the power likely to raise with use or have i used too little grease?
It was only doing 4 and a bit ft lbs before i stripped it but dieselling badly.
Cheers
Russ
-
What condition were the seals in when you stripped the gun?
The cylinder end seal is so easy to damage when taken in/out. That said - how old is the spring?
I found when I previously did the same with my hw45 is settled down within a few shots.
-
Hiya buddy
New spring, new seal
It might be the barrel is not flush upto the breech, I'll try jimmying the barrel along a bit so it's closer to the breech when slide closed.
I'm not power hungry but 5 ft lbs would be great.
Any other ideas pal?
Cheers Russ
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules