Results 1 to 10 of 10

Thread: Morini 162 EI Problem - advice needed

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2004
    Location
    Ashby de la Zouch
    Posts
    2,540

    Morini 162

    I have had one of these pistols from new - almost 16 years

    In all that time it has worked perfectly other than a leak from the cylinder, many years ago
    It was returned to Morini via Surrey Guns and repaired Free of Charge

    There is, or was an agent in Birmingham(a National Squad Member) who serviced these pistols. He, Mick Gault and Nick Baxter in the GB team all use this pistol in International competition

    They must be the best value serious match pistol available
    John
    hold me back !!

  2. #2
    Join Date
    Feb 2002
    Location
    Fareham
    Posts
    629
    Surrey guns is the best bet now, Mick now shoots with the FWB P44, if surrey guns can't fix it they will send it on for you.
    Regards
    Bob

  3. #3
    Join Date
    Jul 2008
    Location
    woking
    Posts
    24

    Problem solved

    Thank you all for the replies.

    Surrey Guns carried out a full service. All new seals and a strip/rebuild. Also replaced one faulty pressure gaugue on a cylinder. £160 GBP later, but at least it's fully sorted and should be good for another 8 years!

    The gun is now working very smoothly. Shot 95 with it a couple of weeks ago, which is good for me. Bench rested on a pistol stand it puts a pellet through the same hole basically every time. Trigger is first class.

    Now very happy. Gun now looks like new and works like new.

  4. #4
    Join Date
    Feb 2002
    Location
    Fareham
    Posts
    629
    Thats good news, hope you have lots of fun with it.
    Regards
    Bob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •