as i i cannot get this to load correctly at all, what i mean is the rifle will not chamber a pellet as things dont seem to line up in the mag1 its a 17 shot mag btw.
any advice as im dyig to ghet some use out of this.
as i i cannot get this to load correctly at all, what i mean is the rifle will not chamber a pellet as things dont seem to line up in the mag1 its a 17 shot mag btw.
any advice as im dyig to ghet some use out of this.
May be teaching you to suck eggs, but here goes (assuming you're right handed)
Face the mag towards you clear side facing
With the lug at 1~2 o' clock rotate the clear housing anti-clockwise until it stops
You should have a hole in the clear perspex lined up through to the back of the mag
Place finger over the back of the mag opening and drop first pellet in
Wind the clear plastic face back clockwise one hole at a time dropping a pellet in each chamber
You should end up back with the 'ear' lined uo and a working mag
I'm telling you it moved!
nothing lined up at all! aaagghhhh. help what am i doing wrong?
Go on the www.rapid7ownersclub.com site the information is on there
Eric
Enjoy every step you take, you never know which one will be your last.
Try going to here http://www.theoben.co.uk/pages.php?pageid=7 download relevant info helped me with my new Rapid good luck
Webley Raider 10-22,Logun Mod,Rhino 6-24-40 irTheoben Rapid Mk11-22,-Gary Caine profile stock-Rhino 8.5-39-52 ir- AWT Mod
may have got it........
Have a look at the Theoben link below, page 2 shows the correct loading proceedure...
http://www.theoben.co.uk/files/r1_ff.pdf
HTH
Tony