Results 1 to 8 of 8

Thread: Bam Airguns

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2003
    Location
    Glasgow, Scotland
    Posts
    1,212

    Exclamation Bam Airguns

    Is there any shops in the uk that sell these,or does anybody own one,i see they do a precharge version as well as springers

  2. #2
    Join Date
    Feb 2007
    Location
    Norwich 'A Fine City' (unless you're a driver)
    Posts
    2,854
    Many places sell them normally under the importers brand SMK (sportsmarketing). You might ocasionally also find XISICO, another importer who are I beleive widning down. The B51 is the PCP they make, a direct copy of an old Daystate design, gets mixed reactions here, ranging from horror and (some justifiable) abuse to quiet appreciation of a cost effective gun. Not on sale in the UK anymore I think. The newermodels (mostly copies of European and US designs) can be OK. The cheaper ones are , well, cheap and sometiems nasty, though they can be improved with sensible work. There is also Industry Brand, BAMs rival, who produce in Shanghai. In general, bar the famous QB78, BAM tend to be better made.

    Unless you specifically want a BAM gun, I would look at something else, a Cometa, or Gamo, if you're after a cheap gun or a seconsdhand HW, BSA or Webley.

  3. #3
    Join Date
    Oct 2001
    Location
    St Helens, Merseyside
    Posts
    7,343
    BAM Pre-Charged don't bother, in fact don't bother with any of them unless your looking for a challenging project with an un-certain outlook.



    Ora

  4. #4
    Join Date
    Jun 2008
    Location
    Barry, South Glamorgan
    Posts
    1,278
    Another name for the the Bam brand is 'Westlake', I bought a sidelever one about two years ago, it was well dodgy, and a bit dangerous, nearly cut me thumb off when the sidelever slammed shut after I cocked it, and this was with an anti bear trap fitted, on further investigation it seemed that the trigger sear only held on to the piston by about 1mm, and not very well neither, the internals were not finished very well(rough edges etc.) I now use it for scrap parts

  5. #5
    Join Date
    Jul 2003
    Location
    Glasgow, Scotland
    Posts
    1,212
    I`m not going to buy one,just that i seen one in the gun shop,complete with cheap scope for......£320!!!!!!

    Can buy a proper TX200 for that.....

  6. #6
    Join Date
    Feb 2007
    Location
    Norwich 'A Fine City' (unless you're a driver)
    Posts
    2,854
    Must be a novelty price...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •