MTC Optics

[Gary C]

well im taking my 10X44 VIPER back tomorow to REDBECK, bought it wednesday & today was the 1st time i got to zero it & the top turrent isnt working

thats was his last 10X44 VIPER aswell, yes i do want another

Never seen that before, if you contact us we'll have it picked up and save you a journey

[LANKY MK]

Never seen that before, if you contact us we'll have it picked up and save you a journey

hello Gary

"....contact us" who's us??

went to emley club today & the top turrent simply wudnt alter the aim at 1st, a couple of the lads came over, they used to use the same scope, to help me but after a fair few pellits it was agreed it was simply not working properly, then its sundenly started to work, in a fashion, then stoped again.

PS: it will turn but its doesnt alter the aim (if you know what i mean).

[snock]

hello Gary

"....contact us" who's us??

went to emley club today & the top turrent simply wudnt alter the aim at 1st, a couple of the lads came over, they used to use the same scope, to help me but after a fair few pellits it was agreed it was simply not working properly, then its sundenly started to work, in a fashion, then stoped again.

PS: it will turn but its doesnt alter the aim (if you know what i mean).

Here.

They'll sort you out.

[LANKY MK]

Here.

They'll sort you out.

thanks snock

pity its a sunday.

[snock]

Gary will be back on soon and will see this, and I've no doubt he and the good folks at MTC will do all they can to help you out.

Their customer care is brilliant.

[LANKY MK]

what can i say, Gary is a top man. bigup the MTC massive .

should have a new scope by wednesday at the latest, should give me time to get used to it abit before going to hull for the comp

[rickysdaystate]

what can i say, Gary is a top man. bigup the MTC massive .

should have a new scope by wednesday at the latest, should give me time to get used to it abit before going to hull for the comp

Nice one! i hope mine gets sorted soon too.

[treetop]

I own 5 Vipers now...
1..... 10 x 44
2..... 3 - 12 x 44
3..... 3 - 12 x 44
4..... 4 - 16 x 50
5..... 6 - 24 x 56

and I must say.....They are Great!!!!
I have never found them not to do what they were bought for..
the customer service I have received.... is second to none....


thanks
Al

[cr4zy3y3s]

Hi all this is my 1st post on bbs and i wish it was under better circumstances.. my ags swat after 2 weeks of owning broke on its 1st outting simple out the turret spins but does not adjust at all.. soo now im in a pickle being in the forces and a shoot coming up very shortly im having to sort out a scope fast.. i have heard nothing but great reviews from not only this forum but r7oc which im a member of regarding the mtc viper.. 8-26x56.. so my question is this are they realy as good as i hear and wheres the best deals to get one?

i am a squaddie so funds are tight not to mention a yorkshire man (with a baby on route)

ill pop back to read replys thank you all and take care

max....

[Pepperdog]

Thank you MTC for a great service, special thanks to Sammie for all your help sorting out my spotty scopes. Even though they were just days from end of warranty, still changed free of charge.

I use my Vipers for rabbits on a sub 12ftlb MK3 and works very well but, if buying again would not use a Viper would go Mamba instead, as turrets do get in way at times.

I am quite interested in trying the new reticle in a mamba for bunny bashing, could it be an improvement on the SCB?

Thanks again and Keep up the good work.

Martin

[LANKY MK]

Ive got an MTC VIPER 10x44, does the following sound like a scope problem? it does to me.

zero scope to 35 yards, shooting spot on from bench, notice the ret is leaning a tiny bit so twist it round abit, start shooting at my 35yard zero and its moved 3 inchs left & half inch down.

[Gary C]

Ive got an MTC VIPER 10x44, does the following sound like a scope problem? it does to me.

zero scope to 35 yards, shooting spot on from bench, notice the ret is leaning a tiny bit so twist it round abit, start shooting at my 35yard zero and its moved 3 inchs left & half inch down.

could be loose mounts, send it back if you are worried

[delta1]

Ive got an MTC VIPER 10x44, does the following sound like a scope problem? it does to me.

zero scope to 35 yards, shooting spot on from bench, notice the ret is leaning a tiny bit so twist it round abit, << Did you re-zero it at this point?>>start shooting at my 35yard zero and its moved 3 inchs left & half inch down.

See the red bit above. Did you re-zero between turning it a bit and starting shooting again?

Something as mundane as re-torquing the mount screws can affect zero, so turning it may certainly knock everything out of line.

[LANKY MK]

See the red bit above. Did you re-zero between turning it a bit and starting shooting again?


Something as mundane as re-torquing the mount screws can affect zero, so turning it may certainly knock everything out of line.

I zeroed it before turning and then straight after (due to it being way off)


Over the past few months ive remounted my VIPER a fair few times and adjusted for cant of ret and never had anywhere near the change in zero, infact cant even remember haveing a change come to think of it.

The full story is long so if you want to get a cup of tea here it is........


Had some major problems with one of my rifles shooting pellits where they shudnt be going, usually up (sometimes by alot), at first i though it was my rifle and gave it a pull through things seem to settle but had strange p.o.i again.

So swaped my viper to my other rifle, thinking its the rifle thats the problem and it zeroed fine then like i said i slightly twisted the scope round abit and the zero changed dramatically, i zeroed it back in and went on course, it was the emley v redferns so wanted to do my bit for the club, after the 1st 2 targets it started shooting strange again like it did with the other rifle (mainly up and left, WAY up usually)

Now the thought that it was me did cross my mind and ill be the 1st to say im not the best shot in the world to say the least but theres no way im that bad (sometimes lucky for the pellit to hit the plate at 30 yards ), ive just tried a hawke tac on the rifle i last used for the viper on and i didnt have a problem.

of course its early days yet so more testing to go this sunday at club and the shop i bought the viper from has asked for it back to test sooooo.