I would send it to Lawrie Armatruda John He is the GOD of co2 and crosmans .
atvb
Dave
Hi Guys,
I need to replace the seals on my Crosman 600 as it leaks into the body most times I put a new cartridge in.
Where can I get a copy of a set of instructions and some new seals from?
Cheers
John
PS unless Phil Bulmer wants to do a Crosman 600 strip
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
I would send it to Lawrie Armatruda John He is the GOD of co2 and crosmans .
atvb
Dave
]Never explain. Your friends do not need it and your enemies will not believe it anyway. ~ Elbert Hubbard[
I just replaced the valve body seal in my Cr600 this morning. The size is #113. I used a 90D urethane o-ring seal.
These links are helpful.
http://smg.photobucket.com/albums/v5...ntiques/CR600/
http://smg.photobucket.com/albums/v5...ners%20Manual/
Cheers,
Todd
Thanks guys, I had forgot that I had asked this question
Dave, I would prefer to have a look myself first, but Laurie is there as an option.
Todd, the diagrams and pages should do the job, now to find a source of O-rings.
Cheers
John
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
Hav to agree, send it to Lawrie, i bought a 600 from him 2 years ago, lent to a friend whos over enthusiasm jammed at a club shoot. On contacting Lawrie he talked me through problem. Top bloke, send it you wont be dissapointed.