Baikal MP 651k modding..

[Shoves]

..I've drilled out the Co2 port on the valve and the gun itself. I'm awaiting a valve so I can strip it, (possibly) widen the internals, de-burr it and put it back together.

However, I'm bored having to wait. I've got a .177 Crosman barrel I'm going to try and fit. It'll mean drilling out where the barrel is fitted up to the seal, and the fore end of the barrel housing.

Wish me luck! (If it all goes Pete Tong, it goes in a big way!)

[Shoves]

I was on the blower to him today, and he's sending me a box of spares for this, so if anything DOES go wrong, at least it should be repairable..

Cheers Phil, much appreciated!

ATVB,

Rob

[Shoves]

For anyone actually bothering to read this(can't think why. I only waffle shoite, anyways), take note.

If you drill something using a powerful drill, use a clamp. Not your hand. It can result in a whopping great bruise on two knuckles, and a large gash on your thumb. Oh, and it hurts like dry buggery too.

Forend drilled out to take 11mm Barrel though, so it ain't all bad news.

[neil1972]

you will learn,,,as i did,,,by the way im following the progress,i would like to see pics when you finished

[Shoves]

you will learn,,,as i did,,,by the way im following the progress,i would like to see pics when you finished

At least there's someone! It's your old one, methinks(there's a ew Neils on here).

Phil at Brokock is sending me a box of spares for it too. It's either gonna be really really good, or absolutely positively crap.

Still, whiles away the quiet hours, and the only one getting injured is me

[northern35s]

There's more out here listening in to to see how you hurt yourself, I mean mod your pistola