Info req?. Beretta 92.

[swiftyx2]

Hi folks,

Quick question for you experts?,

Is the barrel on my Beretta 92 supposed to be loose and move around at the muzzle end?, free floating in side slide.

The chap I purchased gun off had made a silencer come barrel extension and it had been clamped on to the barrel by a grub screw.

Any info would be great as groups seem to shift all over the place.

Thanks Steve.

[Kingplinker]

Sounds like the screw inside needs tightening . Bare with me and I will find a diagram and show you how to do it yourself ,

atvb

Dave

[Kingplinker]

Oh bugger , can't find a diagram

First check that the screw at the front is tight .

OR

Undo that one then slide the top on the pistol off ! Turn the casing and barrel upside down and you will see more screw either side of the barrel , tighten those up and that should cure the problem .

( Its a lot easier if I was actually working on it . ) lol

atvb

Dave

[swiftyx2]

Cheers Dave,

Will give it ago as soon as get home, thanks.

ATB Steve.

[Kingplinker]

Part number 65 is the front screw on the diagram below .

" " 63 are the ones inside !

http://www.mek-schuetzen.de/Blueprints/beretta_co2.jpg

atvb

Dave

[swiftyx2]

Bump.