Results 1 to 3 of 3

Thread: Axsor pump O ring size info wanted

  1. #1
    Join Date
    Sep 2007
    Location
    North York's
    Posts
    34

    Axsor pump O ring size info wanted

    Would anyone know where I can find some information on correct sizes for replacement O rings for an Axsor stirrup pump.
    Internet searches and several enquiries have not resulted in anything useful so far.
    I believe this is the manufacturers web site but they are not responding to enquiries, http://www.cnc-process.se/

  2. #2
    TERRYT is offline I DID see a pussy. I DID! I DID!
    Join Date
    Dec 2007
    Location
    Combe Martin, North Devon.
    Posts
    11,099
    Quote Originally Posted by twozntme View Post
    Would anyone know where I can find some information on correct sizes for replacement O rings for an Axsor stirrup pump.
    Internet searches and several enquiries have not resulted in anything useful so far.
    I believe this is the manufacturers web site but they are not responding to enquiries, http://www.cnc-process.se/
    Hi,

    Your pump is manufactured by FX of Sweden, here is a diagram and part numbers. "O" ring sizes are included.

    http://www.fxairguns.com/_pdf/detail...mp_Drawing.pdf.

    ATVB TERRY..
    Last edited by TERRYT; 28-11-2011 at 08:38 PM.
    Although I still walk softly with a big "STICK" I firmly believe the carrot works best,

  3. #3
    Join Date
    Sep 2007
    Location
    North York's
    Posts
    34
    Thanks for the info but I'm afraid that's not my pump, I had found that diagram before and the arrangement of seals etc. on the middle tube in particular is very different to mine, the only seals that might be the same are on the centre rod and the main valve in the bottom.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •