Hi,
Your pump is manufactured by FX of Sweden, here is a diagram and part numbers. "O" ring sizes are included.
http://www.fxairguns.com/_pdf/detail...mp_Drawing.pdf.
ATVB TERRY..
Would anyone know where I can find some information on correct sizes for replacement O rings for an Axsor stirrup pump.
Internet searches and several enquiries have not resulted in anything useful so far.
I believe this is the manufacturers web site but they are not responding to enquiries, http://www.cnc-process.se/
Hi,
Your pump is manufactured by FX of Sweden, here is a diagram and part numbers. "O" ring sizes are included.
http://www.fxairguns.com/_pdf/detail...mp_Drawing.pdf.
ATVB TERRY..
Last edited by TERRYT; 28-11-2011 at 08:38 PM.
Although I still walk softly with a big "STICK" I firmly believe the carrot works best,
Thanks for the info but I'm afraid that's not my pump, I had found that diagram before and the arrangement of seals etc. on the middle tube in particular is very different to mine, the only seals that might be the same are on the centre rod and the main valve in the bottom.