Just occurred to me that maybe I'm not using the right pellets. I'm currently using RWS R10 7.2 gr which is what I use in my Steyr. What pellets give nice clean holes?
Just occurred to me that maybe I'm not using the right pellets. I'm currently using RWS R10 7.2 gr which is what I use in my Steyr. What pellets give nice clean holes?
Geco's to some extent.
I use all sorts but I back the paper with card. Not superb but it works better than nowt
I found scoring to be very easy with Gamo lead balls as the oxidised lead left nice black marks
Tony
UBC Secretary & Web-ManagerTHL Marksman of the Year 2010
(Airgun Section)
My H&W wadcutters make nice holes, but I find that there are still tears and jagged edges that come from the softness and lack of stiffness of the paper itself, and the way the paper is attached to the backing: if it isn't perfectly flat and smooth, you will get tears.
A problem I have that contributes to this is that my target backing is a softer material designed to "absorb" arrows.
Jim
UBC's Police Pistol Manager
"Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone
I think some of the problem is we're using low velocity air weapons. If we had higher fps then we'd have a cleaner cut hole.
Like many on here, I print mine of onto A4 paper and tape it to a cardboard box
http://i55.photobucket.com/albums/g1...1102008058.jpg
And use a suitable back stop
http://i55.photobucket.com/albums/g1...6102008055.jpg
Good luck, Phil
Last edited by Phil G; 22-11-2008 at 07:02 AM.
I think a corrugated cardboard backer seems favourite. I get up to 16 people turning up for the Umarex comps. I'm going to need a lot of cardboard. Has anyone chronographed an Umarex? My Steyr LP5 cuts beautiful holes at a muzzle velocity of about 480fps.