Ruger Old Army

[fcat]

Hi Tezz,

try here http://www.black-powder.co.uk/bp.htm

list of bp stuff in stock at the bottom; home page gives contact details.
No, I'm not on commission, but if anyone wants to bribe me....

regards
Nigel

[middaycowboy]

Hi Tezz,

try here http://www.black-powder.co.uk/bp.htm

list of bp stuff in stock at the bottom; home page gives contact details.
No, I'm not on commission, but if anyone wants to bribe me....

regards
Nigel

cheers Nigel, just got my variation for 2 .44 BP revolvers Tezz

[Wobbly 2]

cheers Nigel, just got my variation for 2 .44 BP revolvers Tezz

Best get another variation.

Ruger old army is .45, not .44

[middaycowboy]

Best get another variation.

Ruger old army is .45, not .44

oops pass on that one then

[middaycowboy]

Best get another variation.

Ruger old army is .45, not .44

theres one on Guntrader .44 cal for £195

[Wobbly 2]

When I bought my ROA, I had a slot for a .44, but had to get a variation to a .45.

That sounds cheap at 195, possibly a very old one, as they have been made since 1972.

[steve medlock]

The Ruger Old Army is a 44 cal. Mine actually says so under the barrel, behind the rammer, so mine is on my certificate as a .44.

The chambers are .454 but the barrel itself is .44 . Just checked that with my micrometer as I can't always rely on my memory

Steve.

[harricook]

Not sure the reasoning behind it - but we had 2 club members - on the face of it identical ROA revolvers - one stamped .44" & one stamped .45"


.

[moonraker]

When I applied for a slot to get a ROA I asked for a 44/45 and then the same again when I brought a 1860 Army. I believe this is standard parctise in Withshire.

[tacfoley]

ALL .44 calibre black powder revolvers are at least .451" in caliber, and therefore are 'really' .45"...

My ROA was bought new in 1986, and also is marked .44" Cal. So it's on my ticket as a .44.

Like most ROA's, it actually shoots a .457 ball/conical.

tac

[Simon G]

When they first hit the market in 1972, they were designated as a .44cal, using a bore of .443" and a groove of .451". Accuracy was not really what was hoped for using .454 ball, the standard for .44 cal B/P revolvers.

Research then suggested that the best accuracy was obtained using balls of .457" and so, this was ammended in the manuals. However, problems still persisted because of confusion with the .44 designation. This was dropped, stating the calibre was .45, forcing the "old sweats" to ignore general convention and seek projectiles of the recommended size.

A .44 marked specimen will indicate one of very early manufacture. The Ruger Old Army is a .45 calibre, so that's the variation you'll need.