Results 1 to 7 of 7

Thread: Rohm sport Co2 conversion kit

  1. #1
    Join Date
    Nov 2005
    Location
    Whitehaven
    Posts
    1,639

    Rohm sport Co2 conversion kit

    Hi all;

    The kids have bought me one for Christmas, they wont let me fiddle with it but I did see the instructions seems a couple of special tools are required.

    Has anyone fitted one? if so where can i get the tools would like to be prepared and not sit there at Christmas with a bit I cant fit
    John all advice welcome
    I Wear my Badge I have my Voice Proud to be a BASC Member

  2. #2
    Join Date
    Jul 2008
    Location
    Rustington
    Posts
    124

    Rohm CO2 Conversion

    Hi, It's that simple.

    1.5mm Allen key to undo the nudge screw (right side) 1.5 x turns.
    Maybe some strong hand pressure to unscrew the regulator.
    13af ring,open or socket to tighten new CO2 holder.
    Job done.

    Have a good xmas. Paul
    LG100, Panther MK4, HW100Tk, LPSilhouette, LP10, LP50
    http://www.ford-hft.org.uk

  3. #3
    Jim McArthur is offline Frock coat wearing, riverboat dwelling, southern gent
    Join Date
    Sep 2007
    Location
    New Orleans, Louisiana
    Posts
    5,887
    How many shots does it hold?

    Six or more and it's ready for the UBC's police pistol competition!

    Jim
    UBC's Police Pistol Manager
    "Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone

  4. #4
    Join Date
    Nov 2005
    Location
    Whitehaven
    Posts
    1,639
    Quote Originally Posted by Jim McArthur View Post
    How many shots does it hold?

    Six or more and it's ready for the UBC's police pistol competition!

    Jim
    Sorry Jim my Rohm is single shot. However the other half has a Colt 1911 8 shot.
    John
    I Wear my Badge I have my Voice Proud to be a BASC Member

  5. #5
    Join Date
    Nov 2005
    Location
    Whitehaven
    Posts
    1,639
    Quote Originally Posted by TTL PAUL View Post
    Hi, It's that simple.

    1.5mm Allen key to undo the nudge screw (right side) 1.5 x turns.
    Maybe some strong hand pressure to unscrew the regulator.
    13af ring,open or socket to tighten new CO2 holder.
    Job done.

    Have a good xmas. Paul
    Thanks as said was not allowed very near it as it was whisked away smartly. The fleeting glimpse of it gave me concern over being able to get a spanner in the works
    John Have a good one yourself
    I Wear my Badge I have my Voice Proud to be a BASC Member

  6. #6
    Jim McArthur is offline Frock coat wearing, riverboat dwelling, southern gent
    Join Date
    Sep 2007
    Location
    New Orleans, Louisiana
    Posts
    5,887
    Quote Originally Posted by webranger View Post
    Sorry Jim my Rohm is single shot. However the other half has a Colt 1911 8 shot.
    John

    Well, John, get her to enter our comp, and then get that Colt away from here long enough for you to enter our comp!

    Jim
    UBC's Police Pistol Manager
    "Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone

  7. #7
    Join Date
    Nov 2005
    Location
    Whitehaven
    Posts
    1,639
    Quote Originally Posted by Jim McArthur View Post
    Well, John, get her to enter our comp, and then get that Colt away from here long enough for you to enter our comp!

    Jim
    "We" are going to have some practice in these ops. This is a must for me as my average shot rate is very slow. Once we get the hang of reflex shooting were up for it.

    PS
    Ive borrowed the Colt 1911 about a month ago keep forgetting to hand it back, I get so confused.
    John
    I Wear my Badge I have my Voice Proud to be a BASC Member

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •