Intersted in the scope rail, ive got a red dot spare but cant fit it to the exsisting mount, sent pics , jay.
i rerceived my latest skif {my third i got it cheap,cos it had a few scratches on the slide,and the magazine catch was broken,,but i bought this pistol with modifying in mind,,ive had one of these pistols in bits before,,its quite complex inside,,and reassembly,,really needs 3 hands,,cos you have to hold several key components in place,at the same time.first job was to fix the mag catch {missing spring now fixed..i also cleaned,degreased,primed and resprayed the slide,,cos i couldnt really do anything else,,now its satin black,,soon maybe to be glock green..anyway the last time i had one of these apart,i noticed that when the trigger is pulled,the largest of the springs{the one around the barrel is compacted,,and i wondered,,if i shorten this spring,,,the trigger should become a bit more light,for double action shooting,,so this is what i did,i took out the spring and measured it,9 and a quarter cms,,then i chopped off a inch and a half,,then stretched it back to 9 and a quarter cms...once id reassembled it,,there is a noticable difference,to my other skifs,,being a lighter pull,,with no loss of power,,to finish the project off,i added a scope rail,which i got with another skif,and added a red dot sight...what do you think? if anyone has any skif probs,,,gimme a pm,,,ive pics if anyones interested
Intersted in the scope rail, ive got a red dot spare but cant fit it to the exsisting mount, sent pics , jay.
Don’t you find it Funny that after Monday(M) and Tuesday(T), the rest of the week says WTF?
http://www.airgunbbs.com/forums/show...13#post3160113
check out this old post for pics
If you get a Walther 11mm adaptor rail and attack the bottom of it with a file it will fit the skiff. (You need to file off about 1.5mm from the rear half of the base, they're ally so it's not difficult. I would send you a picture of the one I did, but neil has it )
edit: I think I may have misunderstood your problem but meh.....
Oh, and neil your a braver man than me, I got as far as stripping off the top slide to clean and lube and then decided that was enough