Until last weekend my Hornet has been extremeley accurate. I'm now getting flyers on Daystates which haven't been there before. After a thorough clean of the barrel I'm still getting them. Next weekend I'll be trying silencer on/off tests to find the cause but I've just noticed the factory adapter for the silencer can be wagged quite easily at the breech end (not much but noticeable)(equates to 2mm movement at end of Ripley FAC silencer) and there's the beginings of a mark on the silencer exit at 9 o'clock looking at the muzzle. The movement is mainly horizontal though some vertical is possible (my flyers are mainly horizontal too. This adapter (on my early model) has one grub screw to locate it. I've not noticed this free play before and would like to ask Hornet owners if they've got any movement in this piece.