recentre the elevation turrent and put some film under the rear scope mount, then rezero
recentre the elevation turrent and put some film under the rear scope mount, then rezero
Weapon of choice: A 600mm Canon. Author of the Pellet Photobase. Twitter me or Burp the Frog
"It's not what you feel that matters, it's who you touch"
If you change your zero to 45yds, so that the hold under at 30 is nearer the top of the mil dots, you should have a little more to play with.
Hope this helps
I agree with Baldy, you need to have a zeroing distance further away.
When you zeroed at 35 yards did you use clicks down or up?
If down clicks were used you should do what Photosbykev said and then re zero at 50yards.
When zeroing it, I had to use quite a few up clicks! In fact it was shooting about 2ft low and a little to the left!!??
I had thought of zeroing at around 50ish!
I guess the secondary zero would be about 25ish then?
Cheers for the help so far! hope it ain't too windy today!
''THE THINGS YOU SEE WHEN YOU AINT GOT YOUR GUN!'' My Grandfather.
If you find that you don't have much adjustment left when you have got a zero, you may want to try shimming the mount with some foil or film, so that the zero is more in the centre of the adjustment.