-
HW45 Trigger Adjustment
Have just bought a HW45 and very pleased I am too. I've put about half a tin of pellets through it but I still find the trigger a little too heavy.
How many of you HW45 owners have tinkered with the trigger? Do you recommend it or should I just get used to it? Any advice would be gratefully received.
Thanks
Steve.
-
With a little perserverance, you should get it to near match standard, but be careful you don't go to far as the sears could slip.
Bob
All of us could take a lesson from the weather. It pays no attention to criticism.
BARPC
Basingstoke Air Rifle & Pistol Club. Founded 1975
-
Thanks very much for the advice - going to give it a go next weekend.
-
Hi Steve.
I've had a HW45 for many years and found if you screw both ajusting screws in fully then back out about
3/4's of a turn you will have a good two stage trigger and a starting point for more ajustments.
Hope this will help .
ozzy.
-
I found the information on T Coopers site very useful for most things to do with the HW45
HTH
Mark.
http://my.tbaytel.net/~coopers@tbayt...EMBLY_&_TUNING
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules