CP99 Compact problem??

**monkeybob** · 09-02-2009, 05:11 PM

I've just bought a really beaten up CP99 compact. Paid far to much for it.
Can anyone tell me if there should be a little seal washer thingy on the co2 intake,cos there isn't one on mine and gas leaks like mad when i put a new bulb in. I've looked on all my other co2 guns and they all have them

If it should have one (and i suspect it should) where can i get one from?

Answers on a postcard to...
Nah if anyone can help i'd be very grateful

**astraman1** · 09-02-2009, 05:18 PM

yes all co2 guns should have a seal to keep the air in

try here http://www.gunspares.co.uk/

if you cant find one ring and ask coz they do keep alot of spares

**cookie** · 09-02-2009, 05:18 PM

Hi Paul, yes it should have one, try chambers gun spares they should be able to help.

atvb

jason

**monkeybob** · 09-02-2009, 05:21 PM

Blimey that was quick

.
I new it

Cheers for the quick replys

**monkeybob** · 09-02-2009, 05:34 PM

Chambers have one for a CP99 and CP88 and tey both the same bit, would i be correct that they are standard in all umerex co2 pistols and that its called packing at detonator part No. PW056

**cookie** · 09-02-2009, 06:22 PM

Best bet is to ring them.

**monkeybob** · 09-02-2009, 06:29 PM

Originally Posted by cookie

Best bet is to ring them.

Ok m8 i will do tomo...
Did ya get my email regarding UBC?

Paul

**cookie** · 09-02-2009, 07:00 PM

I did, you are our 151 member.

good luck in the comps.

**Sensei Gizmo** · 09-02-2009, 07:44 PM

welcome to the ubc monkeybob

join in the comps there good fun

and you can do them all at home

welcome to the ubc

liam

**monkeybob** · 09-02-2009, 08:57 PM

Originally Posted by Sensei Gizmo

welcome to the ubc monkeybob

join in the comps there good fun

and you can do them all at home

welcome to the ubc

liam

Thanks m8.
Downloaded some of the targets and already had a pop at em

. Did well on the main comp 4 targets double then single handed but side shoot edgar was another story couldn't see the green bits very well from 6 meters

Only hit 7 of em lol

Might have a go at the 147 tomo if it aint pi...... erm raining

**monkeybob** · 10-02-2009, 12:01 PM

Originally Posted by monkeybob

Chambers have one for a CP99 and CP88 and tey both the same bit, would i be correct that they are standard in all umerex co2 pistols and that its called packing at detonator part No. PW056

Rang Chambers very helpful

All the packing at detonators (co2 seals) are the same on all Umarex models so thats cool to know!
Got one on the way

**monkeybob** · 12-02-2009, 10:57 PM

Well it came and its wrong bit. Dunno what the hell it is. Might give Brocock a ring tomo

Thread: CP99 Compact problem??

Thread Tools

Display

CP99 Compact problem??

Quick replys :)

Hmmm the right bit

Posting Permissions