Sir - I assure you that I am not being sarcastic. There is not the lightest hint of sarcasm in my posts on this subject. If you care to look on www.muzzleloadingforum.com you will see my posts there on tnis subject.Originally Posted by lilguy43uk
As a long-time shooter of both rifles and handguns, naturally I am VERY interested to see the results of the investigation.
Please re-read my posts here -
Add Topic Previous Bottom Next
Login Name Post: Genuine query here. (Topic#233741)
tac
50 Cal.
Posts: 1033
Loc: Oregon, Ontario, UK, Japa...
Registered on Sat Aug 06 2005
Wed Apr 29 2009 10:38 AM - Post#713380
OK, 'fess up, how many of you have actually SEEN a modern BP reolver that has blown up when shooting a regular load of correct BP?
Over here in UK there is a thread on a well-regarded forum about such an event - the top-strap has been 'blown out' and a chamber has lost its side.
No other details are forthcoming as the gun has been 'arrested' by the police [nobody has the faintest notion why].
Personally, in over 45 years of shooting BP of all kinds, I have never seen such a thing. In our local gun store there is a display Model 1858 Army that was used to demonstrate what happens if you load it with nitro - but that was intentionally done to act as a deterrent.
Remember, too, that here in UK ALL BP arms have to be proofed before sale, regardless of the country of origin and proof. That means every chamber of every revolver.
Your views are sought.
tac
Email Post Report Post Quote Post Reply
CZMark
40 Cal.
Posts: 470
Loc: Foggybog, WI
Registered on Fri Mar 16 2007
Wed Apr 29 2009 12:45 PM - Post#713395
In response to tac
I'm no expert, but from the damage you describe, I would suspect there was smokeless powder in the cylinder.
Email Post Report Post Quote Post Reply
Mike2005
54 Cal.
Posts: 1623
Loc: Wyoming
Registered on Tue Apr 05 2005
Wed Apr 29 2009 01:18 PM - Post#713409
In response to tac
I have only heard of it happening in a revolver when someone was using smokeless powder.
Email Post Report Post Quote Post Reply
poordevil
40 Cal.
Posts: 132
Loc: Yuma, AZ
Registered on Mon Feb 18 2008
Wed Apr 29 2009 04:06 PM - Post#713454
In response to Mike2005
Never
P
Email Post Report Post Quote Post Reply
Plink
70 Cal.
Posts: 4028
Age: 46
Loc: Texas
Registered on Sat Aug 19 2006
Wed Apr 29 2009 05:54 PM - Post#713482
In response to tac
I've never seen any black powder gun blow up using the proper powder.
Let's assume for a moment that the gun you mentioned had a flaw in the metal of the chamber. That still wouldn't blow out the rather substantial top strap. I strongly suspect someone loaded smokeless powder and didn't realize it. Black powder just doesn't have that much power.
I do gun shows for a living and I run into all sorts. I was talking to a guy at a show once, about my love of black powder guns. He said he'd never own one because they blow up too easily. He said his brother had blown up 3 already! I can only assume that this guy thinks any powder that is black is black powder.
Email Post Report Post Quote Post Reply
tac
50 Cal.
Posts: 1033
Loc: Oregon, Ontario, UK, Japa...
Registered on Sat Aug 06 2005
Wed Apr 29 2009 06:05 PM - Post#713489
In response to CZMark
To CZMark and all - I'm thinking that there is something fishy about this - the police do not usually get involved in cases of damaged firearms - I'm beginning to think that there is some element of criminality here that we are not privy to.
Remember, too, that EVERY BP handgun sold here in UK has to pass UK proof - in every chamber of every revolver, before it can be sold. Unless. of course, there was a fault that 'suddenly' developed. I've never seen or heard of such a thing, either.
I'll keep you all posted, just for interest, if that's OK with you guys.
Best
tac
Email Post Report Post Quote Post Reply
CZMark
40 Cal.
Posts: 470
Loc: Foggybog, WI
Registered on Fri Mar 16 2007
Wed Apr 29 2009 06:14 PM - Post#713493
In response to tac
tac Said:I'll keep you all posted, just for interest, if that's OK with you guys.
Please do.
And yes, the police involvement is curious.
Email Post Report Post Quote Post Reply
Robert an saa fan
45 Cal.
Posts: 736
Loc: Northern California
Registered on Fri Sep 29 2006
Wed Apr 29 2009 06:17 PM - Post#713494
In response to tac
Have been shooting many different black powder revolvers since the early 1970's and have attended lots of gun shows.
In all that time have never verified a modern black powder revolver that was blown up with real black powder. Have seen a few cylinders that were blown up; the stories involved stupid acts by careless people or there was no story.
Back then I decided not to fire the various low quality or "cheap" revolvers as I simply did not trust them.
Email Post Report Post Quote Post Reply
Coot
45 Cal.
Posts: 908
Loc: Goochland, VA
Registered on Mon Jul 31 2006
Wed Apr 29 2009 06:27 PM - Post#713495
In response to tac
A commonly held opinion regarding black powder revolvers is that due to the limited chamber size, you cannot load a bursting charge & still seat the ball. I have never heard of, much less seen, one that burst using real black powder. If one is loaded with modern smokeless powder & only designed for the lower pressure of black powder, it is quite possible. Perhaps the police suspect that someone purposefully substituted smokeless in the shooters flask or can in an attempt to do them harm while appearing to be an accident???
Email Post Report Post Quote Post Reply
Russ T Frizzen
69 Cal.
Posts: 3665
Loc: Massachusetts
Registered on Tue Nov 09 2004
Wed Apr 29 2009 07:05 PM - Post#713510
In response to tac
I have never heard of a C&B revolver bursting when loaded properly. It seems most likely that smokeless powder was used in this instance. Some people think that as long as the powder is black in color it is safe to use, not realising that some smokeles powder is also black. Very hard on the revolver and not good for the fingers either.
Email Post Report Post Quote Post Reply
runnball
50 Cal.
Posts: 1222
Age: 56
Loc: Williamston, NC
Registered on Thu Jan 17 2008
Wed Apr 29 2009 09:40 PM - Post#713546
In response to tac
I would suspect nitro powder. In my almost 40 years of shooting I have personally seen one gun pop and it was not a revolver but an original P53 Enfield. The best guess is that when the minie bullet was seated it came part way back up the bore when the rammer was withdrawn. It was suspected that it either stuck to the end either from a burr or too much lube forming a vacuum between to rammer end and the bullet nose.
Email Post Report Post Quote Post Reply
Homesteader
45 Cal.
Posts: 728
Loc: Camping with the Swamp Fo...
Registered on Mon Aug 23 2004
Wed Apr 29 2009 10:36 PM - Post#713560
In response to tac
Started shooting smokewagons in '75. Never seen it happen.
Email Post Report Post Quote Post Reply
Zonie
Moderator
Posts: 11549
Loc: Phoenix Arizona
Registered on Sat Oct 04 2003
Thu Apr 30 2009 02:03 AM - Post#713645
In response to Homesteader
I've never seen a black powder revolver "blow up" nor one that did.
I've seen modern revolvers after they blew up, usually caused by a barrel obstruction or by using reloads which were overloaded with the wrong powder (Bullseye).
Testing for nitro based powder residue is a fairly easy test for the Police and I'm sure if it was present on the damaged gun they would know.
I'm not sure they would tell the world about their findings though and that's a shame.
As easy as it is for the rumor mill to start spreading false assumptions, it would be good to get the truth out to the public.
If it turns out that this was indeed a failure of the gun with a black powder charge folks need to know. Especially those who persist in loading as much powder as is possible under heavy bullets.
On the other hand, if it was indeed caused by smokeless powder that too should be known so there is no uncalled for over reaction to the event with the typical "Those Black Powder guns are dangerous!" reaction from the general public. Just Jim...
"Keep Your Eyes Peeled"
Edited by Zonie on Thu Apr 30 2009 02:10 AM. Reason for edit: No reason given.
Email Post Report Post Quote Post Reply
tac
50 Cal.
Posts: 1033
Loc: Oregon, Ontario, UK, Japa...
Registered on Sat Aug 06 2005
Tue May 12 2009 04:04 PM - Post#718187
In response to Zonie
Dear Mr Zonie and all - update here - the revolver is presently being examined by the UK's Health and Safety Executive - organisation that looks at possibilites of eventual litigation with regard to manufacturing and/or use of anything that comes to their attention, as this handgun plainly has. This means that we might well be looking at some kind of court case pending - with regard to what issue, I'm afraid that right now I don't know.
However, I'm not far from the action, so I'll post here when I get something positive to tell you all.
tac
Happy now?
tac
Reply With Quote